Advertisement
Advertisement
Table of Contents
Related Manuals for Nova Ride Oversized Pulley Wheel System Sram AXS Red -Force
Summary of Contents for Nova Ride Oversized Pulley Wheel System Sram AXS Red -Force
- Page 1 Mounting Manual Oversized Pulley Wheel System for Sram AXS Red - Force...
- Page 2 General Overview NOVA RIDE OSPW Tools required For the installation of your new NOVA RIDE Oversized Pulley Wheel System Sram AXS Red – Force you will need the following tools: Nova Ride 4 prong tool (attached in the box) 4mm Allenkey...
- Page 3 Nova Ride provides the highest quality products possible, however, to ensure the best performance it’s crucial that the OSPW is mounted correctly. Please take a close look to the following instructions for the installation. Visit the ‘Nova Ride’ YouTube channel to see the mounting video: https://www.youtube.com/watch?v=sf3wjjV-NzI 1.
- Page 4 5. Mark the center screw end with a pen to identify the flat surface of the D on the bottom of the center screw (A). 6. Mount the Sram spring back into the derailleur body. Be careful to place the spring post into the correct hole.
- Page 5 9. Take note of the mark you placed on the center post bolt in relation to the alignment of the top screw on the OSPW cage. Rotate the cage clockwise (looking at the nut and bolt interface) and ensure that the nut does not rotate or tighten.
Need help?
Do you have a question about the Oversized Pulley Wheel System Sram AXS Red -Force and is the answer not in the manual?
Questions and answers