Dacia Sandero III 2021 Manual page 212

UPDATING THE SYSTEM
Saving the system on a USB
key
To save your multimedia system in your
user profile, first connect an empty USB
flash drive to the multimedia system to
create a multimedia system imprint on
the USB flash drive.
Note:
– to insert the USB flash drive in your
multimedia system, refer to the infor-
mation on "Inserting the USB flash
driveˮ in the "Navigation systemˮ
section.
– the USB flash drive is not provided
with the system;
– the USB flash drive in use must be
FAT32 formatted and have a mini-
mum capacity of 4 GB and a maxi-
mum capacity of 32 GB;
– to save the system data to the USB
flash drive, start the vehicle and do
not switch off the engine while the
data are loading;
– do not use any of the multimedia
system functions during the proce-
dure.
System updates must be performed while the engine is running. Electric vehicles must be charging or with the engine
running (READY warning light on).
(2/6)
Content
Update
How to update?
Close
Options
To save the system snapshot to the
USB flash drive, you must:
– plug your USB flash drive into the
USB socket on your multimedia
system;
– from the main menu, select the
"Navigationˮ menu;
– select the "Optionsˮ menu;
– select the "Map Update" menu from
the second page of the "Options"
menu;
– press the "Options" button at the
bottom of the screen;
– select the "Update" function on your
multimedia system screen.
This installs a fingerprint of your nav-
igation system on the USB key which
will be used by the Toolbox to save your
system in your user profile and to let the
Toolbox determine which updates are
available for your navigation system.
When the process of data recording is
finished, you may remove the USB key
from the multimedia system.
GB.99