Samsung AR07BSFCMWKNCV Service Manual page 37

NO. Parts
3 Assy
Control Out
4 Heat Exchanger
Procedure
1) To remove the Cover control box :
Pull the motor wire is
the right side and then remove the
screw.
2) Detach several connectors from
the Assy Control Out.
3) Detach several connectors from
the PCB of Assy Control Out.
2) Loosen ng screw on both sides.
3) Disassemble the pipes in both
inlet and outlet with welding torch.
4) Detach the Heat Exchanger.
37
Remark