Dometic GROUP WAECO PerfectView Accessory Instruction Manual page 20

_RV-SWITCH-SV.book Seite 20 Montag, 24. Oktober 2011 8:34 20
Connecting the control box
The circuit diagram for the control box can be found in fig. 6, page 6:
Pos. Connection name
rt/sw Red/black cable: connection to the two-pin switch
sw Black cable: Connection to earth (terminal 31)
ws White cable:
Connection to the control cable of the three-pin switch for the right-
hand camera (connection to R switch-plug)
Connection to the two-pin switch
gr Grey cable: Connection to the control line of the three-pin switch for the
reverse camera (connection to switch plug L)
rt Red cable: Connection to +12 V to +24 V (e. g. switched positive,
terminal 15)
bl Blue cable: Connection to the monitor control line (standby/monitor on)
gn Green cable: Connection to the right indicator
br Brown cable: Connection to the left indicator light
ge Yellow cable: Connection to the control wire of the three-pin switch for the
left camera (connection to switch plug B)
or Orange cable: Connection to the reversing light
1 Camera connection 1
2 Camera connection 2
3 Camera connection 3
4a Output for reversing monitor (RCA)
4b Output for reversing monitor (DIN)
NOTE
I
RV-SWITCH-SV matches different reversing video components to each other,
but no video standards. For this reason camera and monitor must match (PAL
with PAL and NTSC with NTSC).
Most LCD monitors support both standards.
20
Schaltbox
EN