Table of Contents
Advertisement
Settings and Default Values
To get to settings hold down the 3 buttons [ (+), (power), (-) ] together, until you get
into the mode settings.
Press (+) or (-) to change the setting parameter.
Press (power) to go to the next mode level of the parameter.
● P01: Backlight Brightness
○ (1) Darkest (2) Medium [ D efault ] (3) Lightest
● P02: Distance Unit
○ (0) Kilometers [ D efault ] (1) Miles
● P03: Voltage Grade
○ 24V 36V 48V
● P04: Sleep Time
○ (0) Don't Sleep (1)-(60) Unit Minutes (10) [ D efault ]
● P06: Wheel Diameter
○ (10) [ D efault ]
● P07: Speed Magnetic Steel Number
○ (30) [ D efault ]
● P09: Zero Start and Non-Zero Start Up
○ (0) Zero Start [ D efault ] (1) Non-Zero Start [You want to use this mode]
● P12: Starting Torque
○ (0) Weakest (1)-(4) Mid Range (5) Strongest [ D efault ]
● P14: Controller for limiting value setting default
○ (12) [ D efault ]
● P15: Maximum Speed set to Low Gear Vehicle
○ (40) [ D efault ]
To exit from settings, go to ODO mode, then hold (-) for 3-5 seconds to exit.
11
Advertisement
Table of Contents
