Speed Mode Display; Multifunction Display Area; Error Display - e-JOE Bicycle MOMAS User Manual

Speed Mode Display
Choose between three speed settings.
● Level 1 (Low)
● Level 2 (Medium)
● Level 3 (High)
Increase Speed Level: Press the (+) button next to the LCD dashboard.
Decrease Speed Setting: Press the (-) button next to the LCD dashboard.
Cruise Control: Hold the throttle for three seconds to activate cruise control.
Multifunction Display Area
To change between ODO, TRIP, RM, TM, and ERROR display, press the (power)
button located next to the LCD dashboard.
ERROR Display
The fault status display area, ERROR; When ERROR is flashing, short
press ON/OFF key to adjust the display interface to the ERROR interface. The
corresponding figures represent the specific content of the fault state and are as
follows:
● ERROR 1: Motor Fault
● ERROR 2: Turn Fault
● ERROR 3: Controller Failure
● ERROR 4: Power Brakes
● ERROR 5: Under Voltage Protection
● ERROR 6: Communication Fault - the instrument does not close to the output
of the controller
● ERROR 7: Communication Fault - the controller does not receive the
instrument output
10