Adjusting The Delay Between The Picture And Sound; Enjoying Multiplex Broadcast Sound (Audio) - Sony HT-A3000 Operating Instructions Manual

C:\HT2021\SD0\Data\CEK_CEL_E12\5034490111\5034490111HTA3000CEKCELE12\01GB-HT-
010COV.book Page 36 Sunday, August 22, 2021 1:43 PM
HTA3000CELCEKE12\110SOU.fm
Adjusting the Delay
Between the Picture and
Sound
When the sound does not match the
pictures on the TV screen, you can adjust
the delay between the picture and
sound.
The setting method differs depending
on the input.
For details, refer to Help Guide.
36
GB
Enjoying Multiplex
Broadcast Sound (AUDIO)
You can enjoy multiplex broadcast
sound when the speaker system
receives a Dolby Digital multiplex
broadcast signal.
AUDIO
1
Press AUDIO to select the setting.
The setting appears in the front
panel display.
Setting Explanation
[MAIN] Sound of the main
language is output.
[SUB] Sound of the sub
language is output.
[MN/SB] Main sound is output
from the left speaker
and sub sound is
output from the right
speaker.
Notes
• To output Dolby Digital sound, you need
to connect a TV that is compatible with
eARC or ARC (page 17) to the HDMI OUT
(TV eARC/ARC) jack with the HDMI cable
(supplied).
• If your TV's HDMI IN jack is not compatible
with eARC or ARC (page 17), connect the
TV to the TV IN (OPT) jack with an optical
digital cable (not supplied) to output
Dolby Digital sound.
5-034-490-11(1)
masterpage: Left
HT-A3000