Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for VIA Technologies Mobile360 M810
Summary of Contents for VIA Technologies Mobile360 M810
- Page 1 QUICK START GUIDE VIA Mobile360 M810 1.01-11082022...
- Page 2 Disclaimer VIA Technologies makes no warranties, implied or otherwise, in regard to this document and to the products described in this document. The information provided in this document is believed to be accurate and reliable as of the publication date of this document. However, VIA Technologies assumes no responsibility for the use or misuse of the information (including use or connection of extra device/equipment/add-on card) in this document and for any patent infringements that may arise from the use of this document.
- Page 3 1. Updated Add Vehicle instructions in VIA Fleet Vehicle Registration section. 1.01 11/08/2022 2. Updated descriptions in VIA Mobile360 M810 System Registration and Device Settings sections. 3. Updated screenshot in VIA Fleet Cloud Management Portal's Device Settings section to show updated UI 1.00...
-
Page 4: Table Of Contents
VIA Mobile360 M810 EVK Quick Start Guide Table of Contents VIA Mobile360 M810 Introduction ........................................... 1 EVK Package Content .............................................. 1 1.1.1 Document Folder Content ..........................................1 1.1.2 Firmware Folder ............................................... 2 1.1.3 Tool Folder ............................................... 2 Installing Firmware Using a MicroSD Card ........................................3 Network Configuration .............................................. -
Page 5: Via Mobile360 M810 Introduction
VIA Mobile360 M810 EVK Quick Start Guide 1. VIA Mobile360 M810 Introduction This Quick Start Guide provides instructions on how to boot from the Linux EVK system image on the VIA Mobile360 M810 system and configure the supported hardware functions in the build. -
Page 6: Firmware Folder
VIA_Mobile360_M810_Yocto_2.3_EVK_firmware.zip: This VIA Mobile360 M810 Yocto 2.3 EVK firmware zip file includes the boot loader, kernel and a Linux root file system images. These files are pre-installed on the VIA Mobile360 M810 to evaluate the cloud and AI functions. Users can use this package to restore the system if users mess up the system and want to go back to pre-installed environment. -
Page 7: Installing Firmware Using A Microsd Card
VIA Mobile360 M810 Yocto 2.3 EVK firmware zip file to the root folder of the MicroSD card. An example of the folder structure is shown below: 2. Eject the MicroSD card from the PC and plug the MicroSD card into the MicroSD card slot at the front of the VIA Mobile360 M810 system, as shown in the following... - Page 8 VIA Mobile360 M810 Rear I/O Note: To power up the VIA Mobile360 M810 system, refer to Section "Connecting the VIA Mobile360 M810 to the Vehicle's Ignition (IGN)" and Section "Installing the Phoenix Plug to DC Jack" in the VIA Mobile360 M810 User Manual.
- Page 9 VIA Mobile360 M810 EVK Quick Start Guide 4. The firmware installation process will automatically start if the bootable MicroSD card is detected. You will see the installation process on the HDMI monitor as shown below. 5. Eject the bootable MicroSD card once the process has completed and the system will automatically reboot.
-
Page 10: Network Configuration
To use the web-based utility to access the Network Configuration tool on the VIA Mobile360 M810 system, follow the steps below: 1. Connect the VIA Mobile360 M810 system to an x86 PC with a networking cable, plug the networking cable into the Ethernet port on each device. -
Page 11: Ethernet Settings
3. Once connected to the web utility, select the Ethernet icon on the left side of the screen. 4. The current static IP address of the VIA Mobile360 M810 system will be displayed in the ‘Current Static IP’ field. To change the static IP address, type the desired static IP into the 'New Static IP' field, then click 'Save'. -
Page 12: Wi-Fi Settings
VIA Mobile360 M810 EVK Quick Start Guide 3.2 Wi-Fi Settings The VIA Mobile360 M810's Wi-Fi module can be configured in either hotspot or station mode. Once connected to the web utility, select the Wi-Fi icon on the left side of the screen. -
Page 13: Wi-Fi Station Mode
4. Input the password (if required) and click "Connect". 5. The VIA Mobile360 M810 system will establish a connection. Note: The VIA Mobile360 M810 does not support auto-connect after reboot. To connect to an available hotspot after reboot, repeat the steps above. -
Page 14: Via Fleet Cloud Management Portal
Please refer to the VIA Fleet Cloud Management Portal Quick Start Guide for complete instructions on how to login in and setup the free trial period for a VIA Mobile360 M810 system. The sections below will explain the specific steps related to binding a VIA Mobile360 M810 system as well as how to calibrate and enable the available AI functions. - Page 15 VIA Mobile360 M810 EVK Quick Start Guide 3. A pop-up window will appear asking which device will be installed in the new vehicle. Select "VIA Mobile360 M810" as the VIA Mobile360 Series Platform to be installed and then click "OK".
- Page 16 VIA Mobile360 M810 EVK Quick Start Guide − Vehicle License - Image of the vehicle registration document (not mandatory). − Permitted Drivers - Drivers must be created before adding permitted drivers for the vehicle. • AI Features − Alert Language:...
- Page 17 VIA Mobile360 M810 EVK Quick Start Guide 5. Click “Save” to register the vehicle. 6. After clicking “Save”, the program will return to the “Management -> Vehicles” page. Click the Fleet name and it will expand to show the vehicle has been added to the...
-
Page 18: Via Mobile360 M810 System Registration
4.2 VIA Mobile360 M810 System Registration Before registering a VIA Mobile360 M810 system to the vehicle created in the section above, install the device in the vehicle and complete the calibration process for the cameras/AI features available. Please refer to the VIA Mobile360 Fleet Calibration Tool guide for complete instructions. - Page 19 VIA Mobile360 M810 EVK Quick Start Guide 3. Select “Me” from the bottom row of icons in the app. 4. Select “VIA Fleet Login”. 5. Input the same Username and Password provided for the VIA Fleet Cloud Management Portal to login and tap on “OK”.
- Page 20 11. Tap on “OK” on the pop-up notification to return to the vehicle list where it will show “Registered” beside the vehicle name. Note: The VIA Mobile360 ADAS Display is the recommended accessory to see and hear system alerts. Please refer to Appendix B of the VIA Mobile360 M810 User Manual for detailed information and instructions.
- Page 21 - Displays the SIM card number installed in the VIA Mobile360 M810. Camera & AI Features - Displays the camera ports on the registered VIA Mobile360 M810 system and which features are provided by each camera, calibration status as well as if Pedestrian detection or Parking Assist are available.
- Page 22 VIA Mobile360 M810 EVK Quick Start Guide Note: To register more devices, repeat the steps above.
-
Page 23: Device Settings
VIA Mobile360 M810 EVK Quick Start Guide 4.3 Device Settings The “System Settings” page allows universal settings to be configured for all VIA Mobile360 Series devices registered to an account in the VIA Fleet Cloud Management Portal. - Page 24 When finished making changes, click “Save”. Note: When the VIA Mobile360 M810 system connects to the VIA Fleet Cloud Management Portal, System Settings on cloud will override the local default settings. The VIA Mobile360 M810 does not support parking alerts.
- Page 25 Taiwan Headquarters Taiwan Headquarters Japan Japan China China 1F, 531 Zhong-zheng Road, 940 Mission Court 3-15-7 Ebisu MT Bldg. 6F, Tsinghua Science Park Bldg. 7 Xindian Dist., New Taipei City 231 Fremont, CA 94539, Higashi, Shibuya-ku No. 1 Zongguancun East Road, Taiwan Tokyo 150-0011 Haidian Dist., Beijing, 100084...