Page 2
Step 1 Order #XXXXX - Workstation Assembly 866.652.2100 Part Number Description Left Leg Assembly Right Leg Assembly Horizontal Extrusion Horiontal Extrusion w/ Door Stopper D (w/ Door Stopper) Knobs face INSIDE of workstation Steps: 1) Connect lower horizontal extrusion [C] between bottom of leg assemblies [A and B] as shown. 2) Insert Laminated infill into grooves of leg assemblies [A and B].
Page 3
Step 2 Order #XXXXX - Workstation Assembly (Cont’d) 866.652.2100 Part Number Description Horizontal Extrusion Place internal shelf into Horizontal Extrusion workstation then Steps: place counter atop 1) Attach horizontal extrusion [E] between vertical leg assemblies [A and B] as shown below. assembled workstation.
Page 4
Step 3 Order #XXXXX - P10 Workstation - Case Packing Instructions 866.652.2100 Top View of Each Level Horiz. Extrusion E Horiz. Extrusion F Internal Shelf Leg Assembly Leg Assembly Inserts Counter Door Level 4 Level 1 Level 2 Level 3 Level 5 WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING...