Page 1
User’s Manual – A S Auto Vacuum Drywall Sander REBO Auto Vacuum Drywall Sander AR-HE-LS700C6 Please follow all security measures in this user’s manual to ensure a secure use. Thank you for trusting in AREBOS.
User’s Manual – A S Auto Vacuum Drywall Sander REBO Please read and save these instructions. Read through this user’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings and cautions. Failure to comply with instructions could result in personal injury and/ or damage to product or property.
Page 3
User’s Manual – A S Auto Vacuum Drywall Sander REBO This product has been tested and certified by TÜV Rheinland. The symbol “GS” stands for tested safety. Products marked with this symbol, comply with the requirements of the German Product Safety Act (ProdSG).
Page 4
User’s Manual – A S Auto Vacuum Drywall Sander REBO these are connected and properly used. Use of dust collection can reduce dust-related hazards. Power tool use and care • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Page 5
User’s Manual – A S Auto Vacuum Drywall Sander REBO wheels for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires. If power tool or accessory is dropped, inspect for damage or install an undamaged accessory.
User’s Manual – A S Auto Vacuum Drywall Sander REBO tool in the opposite direction to movement of the wheel in point hooking. • Take special care when working corners, sharp edges etc. • Avoid twists and snaps of the accessory. Corners, edges or sharp twists tend to hang the rotating accessory and cause loss of control or kickback.
Page 7
User’s Manual – A S Auto Vacuum Drywall Sander REBO Assemble instruction Unpacking status shown on below picture Support arm Installation shown on below picture • (Insert support arm to the plastic clamp, insert and tighten screws into both left and right support arm with hex spanner).
Page 8
User’s Manual – A S Auto Vacuum Drywall Sander REBO • The Drywall Sander is designed for sanding walls and ceilings that are made of drywall or plaster. The Sander provides a superior finish, and is faster than conventional finishing methods for both new construction and renovation work.
Page 9
User’s Manual – A S Auto Vacuum Drywall Sander REBO HOW TO HOLD A DRYWALL SANDER • The Drywall Sander should be held with both hands on the main tube as shown in picture. The hands may be positioned anywhere along the main tube to provide the best combination of reach and leverage for the particular application.
Page 10
User’s Manual – A S Auto Vacuum Drywall Sander REBO ASSEMBLE FOR LONGER HANDLE • According to the needs of different grinding position, can be the length of the machine to adjust between 1100-1800mm. The locking nut counter-clockwise to loosen, the pipe is pulled to the right length, and then clockwise rotating locking.
Page 11
User’s Manual – A S Auto Vacuum Drywall Sander REBO pressure can cause unacceptable swirl marks and unevenness in the work surface. Keep the Sander in constant motion while abrasive pad is in contact with the work surface. Use a steady, sweeping motion. Stopping the Sander (on the work), or moving the Sander erratically can cause unacceptable swirl marks and unevenness in the work surface.
User’s Manual – A S Auto Vacuum Drywall Sander REBO Cleaning and Maintenance • Keep clean tools, clean up debris and dust. • Often change grease (gearbox, the bearing) holding tool flexible operation. • Always check the power cord, plugs, switches, etc., so the tool is in good condition. •...
User’s Manual – A S Auto Vacuum Drywall Sander REBO • Wear hearing protection. Disposal Instruction Disposal of the packaging • Please make reference to the guidelines and standards for appropriate disposal of the packaging valid in your region. In part, the package may consist of plastic bags - watch this respect, with special care to ensure that this is not out of the reach of children.
Hereby declare that the product named below, seen its design and construction as well as according to our sales, has been complied with the relevant and basic health and safety EU-requirements. Name of the product: Arebos Auto Vacuum Drywall Sander Model Nr.: AR-HE-LS700C6 Art.
Need help?
Do you have a question about the AR-HE-LS700C6 and is the answer not in the manual?
Questions and answers