To Change The Settings [Parental Lock] - JVC XV-M50BKC Instructions Manual

Initial setting
To change the settings [PARENTAL
LOCK]
You can change the Parental lock settings later.
PLAY
MODE
TV1
1
2 , 5
TV4
4
-1 -1
TV7
7
TV -/--
10
ANGLE
DIGEST
1
VOL
-
RM-SXVM50J REMOTE CONTROL
7 While a DVD VIDEO disc is stopped or no disc is inserted
1
Press ENTER while holding down 7 on the
remote control unit.
The Parental Lock on-
screen display appears
on the TV screen.
points [PASSWORD].
2
Enter your current 4-digit password using the
numeric buttons (0 to 9) and press ENTER.
moves to [Country Code] if you enter the correct
password.
If you enter the wrong password, "WRONG!
RETRY..." appears on the TV screen, and you
cannot go to next step.
3
To change the country code, use CURSOR
2/3 to select the desired country code and
press ENTER.
moves to [Set Level].
When you change the country code, you must
select the parental level.
44
TV DVD
STANDBY/ON
DISC
SELECT TV DVD
3D TV/VIDEO
PHONIC CANCEL RETURN
TV2 TV3
2 3
TV5 TV6
5 6
TV8 TV9
8 9
TV0 MUTING
+10
0
THEATER
SUBTITLE AUDIO POSITION
ZOOM
1, 2 , 3
SELECT -2
3
4 , 5
-2 -2
+
CH
5
VOL
+
ENTER
∞
CH -
3 , 4
-1 -1
PARENTAL LOCK
US
Country Code
8
Set Level
- - - -
PASSWORD
CURRENT PASSWORD? ••• PRESS 0~9 KEY
4
To change the set level, use CURSOR 2/3 to
select the desired level while
Level], and then press ENTER.
moves to [PASSWORD].
5
Enter the password using the numeric buttons
(0 to 9) and press ENTER.
moves to [EXIT].
The password entered in the above step becomes
the new password. If you do not change the
password, enter the same password as in the step 2.
Even if you want to change only the country code
and/or parental level, do not forget to enter the
password after changing the country code and/or
,
-2
parental level. Otherwise, the new country code
and/or parental level will not become effective.
Pressing ENTER again returns to the opening display.
NOTES
• When you enter the wrong password more than 3 times
in step 2 above,
CURSOR 5/∞ does not work.
• If you forget your password in step 2
Enter "8888."
EXIT
points [Set
moves to [EXIT] automatically and