Table of Contents
Advertisement
Adjusting the Image Brightness [THEATER POSITION]
You can adjust the image brightness so it best suits the lighting in the room where the video is being played.
• You can perform these operations from the remote control.
• For DVD Audio discs, you can only adjust the image brightness if the disc includes video images. For discs that only
include still pictures, or do not include any pictures,
While a disc is playing
1
Press [THEATER POSITION] to select the image brightness.
The THEATER POSITION display appears.
Each press of the button changes the THEATER POSITION as shown below.
2
Press [ENTER].
The on screen display goes out.
• If you do not perform any operations for five seconds or more, the display automatically goes out.
fs/RATE Display [fs/RATE]
You can display fs (sampling frequency) and bit rate information while a disc is playing.
• You can perform these operations from the remote control.
While a disc is playing
1
Press [fs/RATE].
The fs (sampling frequency) and bit rate information for each audio channel stored on the disc and the number of
quantized bits is displayed. Five seconds later the display returns to normal.
1
2
The image becomes darker.
3
OFF (Normal position)
DVD
AUDIO
DVD
AUDIO
VIDEO
CD
Audio channel data (Blinks)
is displayed.
VIDEO
CD
Sampling frequency (kHz)
Example: 96kHz
Basic Operations
AUDIO
DVD
VIDEO
DVD
CD
AUDIO
VIDEO
CD
THEATER
1
Theater position
Quantized bits
Example: 24 bit
39
Advertisement
Table of Contents
