Cudy POE35 Quick Installation Manual

Package
1
Contents
Check the following contents of your package:
PoE Extender x 1
User Guide x 1
Wrench x 1
Accessories (water joint)
If any part is lost and damaged, please contact your local agent immediately.
Introduction
2
This Product is a Gigabit IP67 waterproof PoE extender independently developed by our company. It
supports one JR45 (PD) port in and 95W input(IEEE802.3bt). Two ports have PSE function, each supporting
up to 30W output, without configuration, plug and play.
Professional room shell design, adapted to various harsh environments, with high stability, reliability,
industrial level, wide temperature. The whole machine does not need power adapter, so it is convenient for
harsh outdoor environment .reliable and convenient power for outdoor work AP, cameras etc.
Hardware Description
3
Front Panel
The front panel composed by PSE output port，input port and relevant indicator, as shown below:
LED Color
Off: No device is connected to the corresponding port.
Light: Indicates the link through that port is successfully established at 10/100/1000Mbps.
LAN Green
Blink: transmitting data and power.
Desktop Installation
Install the machine on a desktop, place the machine carefully on the counter, the bottom is as follows:
Function
Wall-mounted installation
Please follow these steps to install the machine:
First fix the four screws on the wall (screw cap diameter recommended 5.5-6.5mm) and turn the machine
upside down. Align the four fixing holes of the machine as shown below and hang the machine smoothly on
the screws.
Schematic diagram of left panel: input port (PoE In) and grounding column, Standard network Cate5 cable
(line diameter 5.5mm).
Schematic diagram of right panel: the output port (PoE out) requires the use of standard network cate5
cable (Line diameter 5.5mm).
Left Panel
Application diagram of PoE Extender
4
Data+Power 100 Metres
95W PoE Injector
Data+Power 100 Metres
POE 35
Data+Power 100 Metres
Right Panel
Gigabit Switch