Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Eachine X220 V3
Summary of Contents for Eachine X220 V3
- Page 1 X220 V3 QUICK START GUIDE...
- Page 2 X 2 2 0 V3 QUICK START GUIDE Package included: 1 x X220 V3 frame kit 2 x 2207.5 2550KV brushless motor CW 2 x 2207.5 2550KV brushless motor CCW 4 x 35A BLHeli_S ESC 1 x Customized F405 PDB flight controller 1 x RunCam Phoenix 2 1000TVL camera 1 x 5.8G 40CH 0mW/25mw/200mw/600mw VTX Switchable...
-
Page 3: Table Of Contents
X 2 2 0 V3 QUICK START GUIDE Contents 1.0 Frame kit------------------------------------------------ 04 2.0 Motor----------------------------------------------------- 04 3.0 Esc------------------------------------------------------- 05 4.0 Flight controller--------------------------------------- 05-06 5.0 Switchable VTX--------------------------------------- 06 6.0 Camera-------------------------------------------------- 07 7.0 Taillight Buzzer---------------------------------------- 07 8.0 Motor Unlock/lock------------------------------------- 08 9.0 Traversing flight--------------------------------------- 08 10.0Adjusting parameter reference-------------------- 09-12... -
Page 4: Frame Kit
X 2 2 0 V3 QUICK START GUIDE 1.0 Frame kit Wheel base: 225mm Upper plate thickness: 2.0mm Frame arm thickness: 5.0mm Bottom plate thickness: 2.0mm X plate thickness: 2mm Frame standoffs: M3*20mm 6 PCS 2.0 Motor Dimensions: 2207.5 Motor KV: 2550 RPM/V Lipo cell: 3-4S Weight: 34g Max continuous current: 45A... -
Page 5: Esc
X 2 2 0 V3 QUICK START GUIDE 3.0 ESC Input Voltage: 3-6s lipo Operating Current: 35A Peak current: 40A BEC: NO Dimensions: 30×10mm MOS: AON7418 Firmware: BLHeli_S Agreement: DSHOT150/300/600/1200/ONSOHT125MultiShot Damped Weight: 3.0g 4.0 Flight controller MCU: STM32F405 GYRO: BMI270 Barometer: BMP280 Blackbox: 16M Memory Input: 2-6S Lipo... -
Page 6: Switchable Vtx
X 2 2 0 V3 QUICK START GUIDE 5.0 Switchable VTX Item name: 5.8G 40CH 0mW/25mw/200mw/600mw VTX Switchable Output power and transmission distance: ≥0.5km@25mW, ≥1km to 200mW, ≥2km to 600mW Transmission power: 0mW / 25mW / 200mW / 600mW Full video format: NTSC / PAL Input voltage and power dissipation: 7V ~ 24V, + 12V / 260mA @ 600mW Size: 36*36*6mm Weight: ≤... -
Page 7: Camera
X 2 2 0 V3 QUICK START GUIDE 6.0 Camera Model number: RunCam Phoenix 2 Image Sensor: 1/2 inch super wide motion sensor Horizontal resolution: 1000TVL Camera Lens: 2.1 mm (M12) Fov 155 ° (4:3) Screen scale: 4:3/16:9 switchable Mirror image: YES Video format: NTSC/PAL switchable Signal to noise ratio: >... -
Page 8: Motor Unlock/Lock
X 2 2 0 V3 QUICK START GUIDE 8.0 Motor Unlock/lock Set the unlock switch at BF ground station, turn on the remote control, turn the throttle to the lowest point, connect the battery on the plane, unlock the take-off. 9.0 Traversing flight 1).Flying is more suitable for experienced pilots. -
Page 9: Adjusting Parameter Reference
X 2 2 0 V3 QUICK START GUIDE 10.0 Adjusting parameter reference (1).Connecting flight controller USB，click"Connect" (2).Flatten the aircraft and click in order“1”“2” (3).Open the serial port corresponding to the receiver... - Page 10 X 2 2 0 V3 QUICK START GUIDE (4).Configuration File (5).Receiver RSSI signal strength mapping channel -10-...
- Page 11 X 2 2 0 V3 QUICK START GUIDE (6).Patterns Flip the remote switch to confirm mode (7).Motor Remove all propellers and check that the motor is turning in the same direction as shown in the picture Push the slider to confirm Flip the switch motor sequence 1.2.3.4 -11-...
- Page 12 X 2 2 0 V3 QUICK START GUIDE (8).OSD Open the required functionality and click Save in the lower right corner -12-...