Eachine EX3 User Manual
  1. Manuals
  2. Brands
  3. Eachine Manuals
  4. Quadcopters
  5. EX3
  6. User manual

Eachine EX3 User Manual

Hide thumbs Also See for EX3:
Table of Contents

Advertisement

Quick Links

EX3
User Manual
Farther.Faster.Clearer

Advertisement

Table of Contents
loading

Related Manuals for Eachine EX3

Summary of Contents for Eachine EX3

  • Page 1 User Manual Farther.Faster.Clearer...

  • Page 2: Table Of Contents

    Contents Product Profile Introduction Prepare Your EX3 Prepare the Remote Controller Major Parts & Functional Switch Aircraft Flight Modes Aircraft Status Indicator Lights Return to Home (RTH) Vision System Aircraft Power Switch Aircraft Battery Attach and Detach the Propellers Remote Controller...

  • Page 3: Product Profile

    Introduction ● Equipped with Vision System and GPS System, your EX3 can precisely position, hover and automatically return. It is also capable of flying in the intelligent flight modes like Point of Interest, Follow Me and Waypoint Flight. Features a single-axis gimbal, your EX3 can shoot 2K, 2-megapixel photos and adjust camera angle 90 degrees in flight.

  • Page 4: Prepare The Remote Controller

    EX3 User Manual Battery installation Slide the battery into the battery compartment at the rear of the aircraft by pushing with appropriate force. Make sure that you hear a click sound indicating the battery is firmly installed. Attention: The battery should be installed firmly, failure to do so may affect the flight safety of your aircraft.

  • Page 5: Major Parts & Functional Switch

    EX3 User Manual Major Parts & Functional Switch [1] Power switch [2] Brushless motor [3] Undercarriage [4] Propeller [5] Camera [6] Ultrasonic sensor [7] Lights [8] Vision positioning lens [9] Battery [1] Photo/Video [2] Left stick [3] One-key unlock [4] One-key RTH...
  • Page 6 EX3 User Manual [8] One-key takeoff/ one-key landing [10] [9] Gimbal trimmer [10] High/Low speed switch(short-press); Light switch (long-press) [11] Gesture/GPS mode switch [11]...

  • Page 7: Aircraft

    This section introduces functions and features of the EX3. Flight Modes Your EX3 has two flights modes: GPS mode: ON Slide the button up at the right side to position “ON” (Pic.1), the aircraft is in GPS mode and can precisely position and hover by the assistance of the GPS module.

  • Page 8: Aircraft Status Indicator Lights

    EX3 User Manual Aircraft Status Indicator Lights Aircraft front light Aircraft rear light Aircraft front light Aircraft rear light Aircraft status indicator Indicator status Meanings Front and rear lights flash yellow rapidly. Aircraft 2.4GHz disconnected. Front and rear lights flash red, green and Aircraft is in initialization detection status.

  • Page 9: Return To Home (Rth)

    EX3 User Manual Indicator status Meanings Front and rear lights flash once, stop Something wrong with the gyroscope. for 1.5 second. Front and rear lights flash twice, stop Something wrong with the barometer. for 1.5 second. Front and rear lights flash three times, stop Something wrong with the compass.
  • Page 10 You can press the RTH button again to exit RTH procedure and regain control of the aircraft. Low Battery RTH The low battery level failsafe is triggered when the Eachine intelligent battery is depleted to a point that may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately when prompted.

  • Page 11: Vision System

    Made up by camera ①, camera ② and ultrasonic sensor ③, the Vision System locates at front bottom of your EX3. It is a positioning system that is combined by image sensor and ultrasonic sensor. Your EX3 acquires its location and perceives obstacles through using the camera sensor to detect the ground texture and visible features.
  • Page 12 EX3 User Manual The precision of the vision system is easily affected by the light strength and features of the surface textures. It would happen that the ultrasonic sensor could work normally to detect the altitude when it is flying over objects that is made by sound-absorbing materials.

  • Page 13: Aircraft Power Switch

    Once battery is installed firmly, press on the power switch for 3 seconds, the aircraft makes beep sounds and the lights keep flashing. Turn off the aircraft Press on the power switch for 3 seconds, the aircraft lights go off and the EX3 turns off. Aircraft Battery ● Made by high-energy battery cells;...

  • Page 14: Attach And Detach The Propellers

    EX3 User Manual ● Need adult supervision when this aircraft is being played by children. ● Only batteries of the same or equivalent type as recommended are to be used. ● Insert batteries with correct polarity. ● Rechargeable batteries are to be removed from the aircraft before being charged.
  • Page 15 ● Ensure that all propellers are in good condition before each flight. DO NOT use aged, chipped, or broken propellers. ● To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are spinning. ● ONLY use original Eachine propellers for a better and safer flight experience. -13-...

  • Page 16: Remote Controller

    Remote Controller This section describes the features of the remote controller, including the instruction on controlling the EX3. Remote Controller Functions and Status Flight mode switch Choose the flight mode by switching the GPS button to ON/OFF position. GPS mode...
  • Page 17 EX3 User Manual LCD Screen display Return to Home (RTH) icon Signal strength Aircraft battery Remote controller level battery level Photo/Video Distance against High/Low speed Home Point mode Satellite amount Altitude against GPS mode Remote controller Home Point throttle mode...
  • Page 18 APP interface. One-key takeoff/landing ● After the EX3 unlocked, short-press the “ ” button (indicated as below), the aircraft will automatically take off and hover at 1.5m altitude.
  • Page 19 EX3 User Manual Smart RTH button ● Press the button to start the RTH, the remote controller makes a beep sound and the aircraft will fly back to the recorded Home Point. ● Press the RTH button again to exit RTH procedure and regain control of the aircraft.

  • Page 20: Throttle Control Stick Mode

    EX3 User Manual Optimal transmission zone To obtain a satisfied flight experience, please make sure that your EX3 is flying ahead of the remote controller and no obstacles between the aircraft and the remote controller. Optimal transmission zone Throttle Control Stick Mode...

  • Page 21: Install Mobile Phone Holder

    EX3 User Manual ① ② Pic. 1 Pic. 2 Attention: To change the stick mode of the remote controller, please make sure that the remote controller is under signal connection status (the indicator light keep flashing). If not, the stick mode could not be changed.

  • Page 22: App Download & Installation

    App Download & Installation This section introduces how to download the “X-DRONE” APP and connect with mobile device. FPV Real-time Image Transmission Software “X-DRONE” Where to download “X-DRONE” APP 1. For Apple IOS system, please turn to Apple store, search “X-DRONE” or scan the QR code as below to download the software.
  • Page 23 To obtain the best live view, please choose a wide open area to fly in. As tested, the EX3 could transmit 2K videos up to 800 meters (0.6 mile) in Farther.Faster.Clearer an environment with no interference.

  • Page 24: Flight

    6. Your EX3 cannot use GPS within the polar regions. Flight limits and GEO zones Abide by all laws and regulations when flying your EX3. Flight limitations are applied by default to help users operate this product safely and legally. Flight limitations include altitude limits, distance limits and GEO Zones.

  • Page 25: Pre-Flight Checklist

    3. The arms and propellers are unfolded; 4. Ensure the camera lens are clean; 5. Use only Eachine parts or parts certified by Eachine. Unauthorized parts or parts not from Eachine certified manufacturers may cause malfunction or safety issues. Aircraft Operations Signal connection between the aircraft and remote controller ●...
  • Page 26 EX3 User Manual Attention: Make sure that the aircraft is set on a flat and still surface for the initialization detection. Aircraft compass calibration 1. Compass calibration should be performed after successful aircraft initialization detection. 2. Aircraft compass calibration should be done for every flight. That is to say, if changing new battery or the battery is reinstalled, compass calibration should be done again.
  • Page 27 EX3 User Manual Attention: To fly at GPS mode, please choose an open and wide space for the flight, and make sure that the satellite amount is over 7. ● Please do not calibrate the compass in strong magnetic area, such as magnetic field, parking place or construction areas with underground reinforcement.
  • Page 28 EX3 User Manual Method 2: After the aircraft lands on the ground, pull down the throttle stick to the bottom position and keep for 3 seconds, the motors will stop rotating and the aircraft is locked. Warm tips：Please do not lock the aircraft by pressing the “ ” button directly during the flight, or the aircraft will be crashed.

  • Page 29: Test Flight

    3. Connect the remote controller with the aircraft and then proceed aircraft initialization detection. 4. Connect the EX3 with your phone and enter into the image transmission interface. 5. Unlock the aircraft after the gyro detection of the aircraft is completed.

  • Page 30: Appendix

    Appendix Product Parameters Aircraft Gross Weight EX3: about 640g (Battery and propellers included) Dimensions Folded: 190*130*75mm(length*width*height) Unfolded: 450*450*75mm(length*width*height) Diagonal 350mm Max Ascent Speed 3m/s Max Descent Speed 2m/s Max Speed 40km/h Flight Height Limitation 150m Max Flight Time 22 minutes (no wind) Max Wind Speed Resistance ≤Level 3...
  • Page 31 EX3 User Manual 2.4-2.4835GHz Operating Frequency 5.15-5.35GHz Transmission Power (EIRP) 2.4GHZ≤20dBm 5GHz≤16dBm Gimbal Controllable Range Tilt: -90°- 0° Camera Image Sensor 1/3 “ CMOS; Effective Pixel: 2 million Lens FOV: approx. 110° Aperture: f/2.4 Shooting Range: 1m to ∞ ISO Range...
  • Page 32 EX3 User Manual Charger Input Type C 1: 5V 2A Type C 2: 5V 2A Charging Voltage Battery 1: 3.8 2A Battery 2: 3.8 2A Rated Power 15.2W Aircraft Battery Capacity 3400mAh Voltage 7.6V Operating Temperature LiPo 2S Energy 25.84Wh...

  • Page 33: Packing Detail

    EX3 User Manual Packing Detail Full package includes the following parts. Aircraft *1 Remote Controller *1 Extra Propellers Set *1 Aircraft Battery *1 Charger x1 USB Cable x1 Quick Start User Manual Farther.Faster.Clearer Farther.Faster.Clearer Screwdriver x1 Quick Start x1 User Manual x1...

  • Page 34: Important Statement

    EX3 User Manual Important Statement ● This aircraft is not a toy, but hobby grade model. It should be assembled and operated properly. Pilot must operate this aircraft in safe way. Improper operation may cause injury or property damage. ● This aircraft is applicable for pilots aged 14+ who are with skilled flying experience.
  • Page 35 EX3 User Manual ● Keep away from heat source The aircraft is made of metal, fiber, plastic, electronic component and other material. Please keep it away from the heat source to avoid deformation or even damage caused by sun exposure and high temperature.
  • Page 36 Note: a) Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

Table of Contents