Table of Contents
Advertisement
22
www.aeg.com
Problem
The drying cycle
is too short.
Drying cycle too
6)
long
1) If there is an error message on the display (e.g. E51): Turn the tumble dryer off and on. Select a new
programme. Touch the Start/Pause button. If the appliance does not operate contact the service centre
and provide the error code.
2) Follow the programme description — see the PROGRAMMES chapter .
3) See the
CARE AND CLEANING chapter.
4) Only dryers with the Dryness option.
5) See the HINTS AND TIPS chapter .
6) Note: After a maximum of 5 hours the drying cycle ends automatically.
11.1 Possible causes of
unsatisfactory drying results:
• The filter is clogged. Clogged filter
makes drying inefficient.
• The airflow slots are clogged.
• The humidity sensor is dirty.
• The drum is dirty.
12. TECHNICAL DATA
Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Possible cause
1)
The load size is small.
The laundry is too dry.
The filter is clogged.
The load is too large.
The laundry was not spun suffi-
ciently.
Too low or too high room temper-
ature - this is not the appliance
malfunction.
Select a time programme. The
time value must be related to the
load. To dry one item or a small
amount of laundry we recommend
short drying times.
Select an appropriate time pro-
gramme or a higher dryness level
extra dry )
(e.g.
Clean the filter.
Do not exceed the maximum load
size.
Spin the laundry well in the wash-
ing machine.
Ensure a room temperature higher
than +5°C and lower than +35°C.
Optimal room temperature to ach-
ieve best drying results is between
19°-24°C.
• Inadequate default dryness level
settings. See chapter
default dryness level
• Room temperature is too low or too
high. Optimal room temperature is
between 19°-24°C.
850 x 600 x 600 mm (maximal 665 mm)
1100 mm
950 mm
Remedy
Adjustment of
Advertisement
Table of Contents
