Download Print this page

JVC KS-RC104 Installation & Connection Manual

Steering wheel remote control oe remote adapter peugeot with 4 function remote

Advertisement

Quick Links

KS-RC104 OE Remote Adapter Peugeot with 4 function remote
KS-RC104 Lenkrad-Fernbedienungs-Adapter Peugeot mit 4 Funktionen
KS-RC104 Adaptation de commande au volant Peugeot avec 4 fonctions
WARNINGS
Installation requires some special knowledge.
Do not install the adapter yourself. For safe and reliable installation, consult a dealer having special knowledge.
Never use bolts or nuts from the car´s safety devices for installation.
If bolts or nuts from the steering wheel, brakes or other safety devices are used for installation of the adapter, it may cause an accident.
Use the adapter with a DC 12V negative ground car.
This adapter cannot be used in large trucks which use a DC 24V battery.
If it is used with a DC 24V battery, it may cause a fire or accident.
Avoid installing the adapter in following places.
-
Where it would hinder your safe driving.
-
Where it could damage the car´s fittings.
CAUTION
Since there may be legal regulations defining the permissible installation locations for this adapter,
be sure to install the adapter in a location complying with any such laws.
_________________________________________________________________________________________________________
WARNUNG
Die Installation sollte durch geschultes Fachpersonal durchgeführt werden.
Verwenden Sie niemals sicherheitsrelevante Schrauben, Bolzen oder sonstige Befestigungspunkte an Lenkung,
Bremssystem oder anderen Komponenten, um Ihre eigene Fahrsicherheit nicht zu gefährden.
Schließen Sie den Adapter nur an 12V KFZ Spannung mit Masseverbindung zur Karosserie an.
Diese Unterbaugruppe ist nicht zugelassen zum Einsatz in LKW´s oder anderen KFZ mit 24V Bordspannung.
Vermeiden Sie den Einbau des Adapters an Stellen wodurch Ihre Fahrsicherheit
oder die Funktionstüchtigkeit anderer im Fahrzeug verbauter Unterbaugruppen eingeschränkt würde.
HINWEIS
Bitte verwenden Sie die in dieser Montageanleitung vorgeschriebenen Punkte zur
Montage des Lenkrad-Fernbedienungs-Adapters.
_________________________________________________________________________________________________________
ATTENTION
Puisque le montage de l'adaptation exige des connaissances spéciales, chargez-en un marchand ayant du personnel qualifié.
N'utilisez jamais d´ écrous, de boulons ou d'autres points de fixation du volant, des freins,
ou d'autres parties importantes pour votre sécurité. Cela pourrait causer un accident.
Ne branchez l'adaptation qu'à une tension de 12 V pour véhicules automobiles avec une connexion de la masse à la carrosserie.
Cette adaptation est interdite aux camions et autres véhicules avec une tension de 24 V.
Evitez le montage de l'adaptation là où elle pourrait gêner votre sécurité de conduite et où les fonctions des autres installations du
véhicule pourraient être limitées.
REMARQUE
Vous êtes prié d'installer l'adaptation de commande au volant aux endroits indiqués dans cette instruction de montage.
This OE Remote adapter KS-RC 104 has been developed to be used in the following cars in order to operate a JVC Car Receiver* using the
originally built in remote control unit: Peugeot 206 10/98~ 08/99, 306 04/93~ 08/99, for the following cars please use the included DIN-
adapter, see picture side 2: Peugeot 405 11/92~ 8/97, 605 9/90 on, Citroen XM up to 6/94.
Der Lenkrad-Fernbedienungs-Adapter KS-RC104 wurde für folgende Fahrzeuge entwickelt: Peugeot 206 10/98~ 08/99,
306 04/93~ 08/99, für folgende Fahrzeuge wird zusätzlich der beigelegte DIN- Adapter benötigt, siehe Abbildung Seite 2:
Peugeot 405 11/92~ 8/97, 605 ab 9/90, Citroen XM bis 6/94.
L'adaptation de commande au volant KS-RC104 a été développée pour les voitures suivantes : Peugeot 206 10/98-08/99,
306 04/93-08/99, pour les voitures suivantes utilisez s'il vous plaît l'adaptation DIN ci-joint, voire l'ill. page 2 : Peugeot 405 11/92-8/97,
605 dès 9/90, Citroen XM jusqu'à 6/94.
*
Must be equipped with the steering wheel remote input.
Muss mit einem Eingang zur Aufnahme einer OEM Lenkrad-Fernbedienung ausgestattet sein.
Faut être équipé d'une entrée pour brancher une commande au volant OEM.
LVT1098-005A
Installation / Connection Manual for steering wheel remote control
Einbauhinweise für Lenkrad-Fernbedienungs-Adapter
Indication de montage de l'adaptation de commande au volant
1

Advertisement

loading

Summary of Contents for JVC KS-RC104

  • Page 1 Vous êtes prié d’installer l’adaptation de commande au volant aux endroits indiqués dans cette instruction de montage. This OE Remote adapter KS-RC 104 has been developed to be used in the following cars in order to operate a JVC Car Receiver* using the originally built in remote control unit: Peugeot 206 10/98~ 08/99, 306 04/93~ 08/99, for the following cars please use the included DIN- adapter, see picture side 2: Peugeot 405 11/92~ 8/97, 605 9/90 on, Citroen XM up to 6/94.
  • Page 2 Liez la fiche à jack du KS-RC104 au pendant à la radio JVC. 4. Connect the red wire from KS-RC104 to ignition (KL.15), and the ISO plug to the JVC car receiver. Rote Leitung des KS-RC104 mit Zündung (Klemme 15) verbinden, ISO Stecker in das JVC Radio stecken.
  • Page 3 Cassette: MMS -1 CD: previous track CD-Changer: previous track The functions and controls of the buttons vary according to the JVC car receiver. Please check the installation / connection manual of the JVC car receiver to understand the supported functions and controlls.
  • Page 4 CD: précédent titre CD-Changer: précédent titre Les functions des touches de la command au volant peuve être different, dependant les accessoires furni avec la radio JVC. Pour savoir le fonction supporté, referez au mode d´emploi de votre radio JVC, S.V.P. LVT1098-005A...