Table of Contents
Advertisement
en Basic settings
Pour liquid detergent
3.
softener
into the relevant dis-
pensers.
→ "Detergent drawer", Page 17
Do not exceed the marking for the
maximum fill level when filling.
Close the dispenser cover.
4.
Note: To prevent the liquid deter-
gent or fabric softener from drying
out, close the dispenser cover im-
mediately after filling.
If required, pour washing aid into
5.
the compartment for manual dos-
ing.
→ "Adding detergent and care
product", Page 34
Push in the detergent drawer.
6.
Adjust the basic dosage
7.
→ Page 38.
15.3 Dispenser contents
Notes
¡ If you change the contents of the
dispenser, the basic dosage for
this dispenser is reset.
¡ If you use both dispensers for li-
quid detergent, you must select a
dispenser which is to be used dur-
ing washing.
You can change dispenser contents
in the basic settings.
→ "Changing the basic settings",
Page 39
38
and fabric
15.4 Basic dosage
The basic dosage depends on the
manufacturer's instructions for the de-
tergent, the water hardness and the
degree of soiling of the laundry.
Always set a basic dosage that cor-
responds to the dosage for a stand-
ard load of 4.5 kg.
You can change the basic dosage for
the dispenser in the basic settings.
→ "Changing the basic settings",
Page 39
16 Basic settings
You can configure the basic settings
for your appliance to meet your
needs.
16.1 Overview of the basic
Basic setting
end signal
button signal
Drum clean ad-
vice
Language
settings
content
basis
Description
Volume of the
signal emitted
when the pro-
gramme ends
Volume of the
signal emitted
when the buttons
are pressed
Activate or deac-
tivate the re-
minder to clean
the drum
Changing
the language
Specify the dis-
penser content
→ "Dispenser
contents",
Page 38
Change the ba-
sic dosage
Advertisement
Table of Contents
