Child Lock 3 Sec; Adding Laundry - Siemens WM16Y792AU Instruction Manual And Installation Instructions

Table of Contents

Advertisement

During washing, the progress of the
programme is displayed in a bar on the
display panel. The bar fills in during the
washing cycle and provides information
about the current progress of the
programme.
The arrows fade in and out according to
the progress of the programme. They
indicate the programme settings/
options which can be changed/added
as the programme progresses.
Some programme sequence steps
explained:
Load adjust active ~ Page 32
Pre-washing, Washing, Rinsing,
Spin, Drain ... are displayed during
the wash cycle.
Extra rinse: foam
Note:
Foam detection
If Foam has been detected also
appears on the display panel, the
washing machine has detected too
much foam during the wash
programme and has automatically
switched on one or more rinse
cycles in order to remove the foam.
Add less detergent to the next
washing cycle with the same load.
Other displays ~ Page 37
If you want to lock the programme to
prevent it from being inadvertently
adjusted, you can select the childproof
lock as follows.
Operating the appliance

Child Lock 3 sec.

You can lock the washing machine to
prevent the functions you have set from
being changed inadvertently.
To activate/deactivate, press both
Child Lock 3 sec. buttons for approx.
3 seconds. ~ Page 11
w Childlock has been activated
appears on the display panel.
After approx. 3 seconds, the display
reverts back to the main menu.
If the programme selector is adjusted or
a button is selected while the childproof
lock is active, the w symbol flashes
briefly.
Notes
The childproof lock can be activated
at any time.
The childproof lock remains active,
even once the washing machine has
been switched off. Before selecting
the next programme, deactivate the
childproof lock.
If the appliance is switched off while
the programme is running and
childproof lock is activated, the
programme continues when the
appliance is switched back on.

Adding laundry

After starting the programme, you can
add or remove laundry if necessary.
Press the Ü button to do this.
The Ü button indicator lamp flashes
and the machine checks whether it is
possible to add laundry.
It is possible to add laundry when
Pause: Reload is possible appears on
the display.
To continue the programme, press the
Ü button. The programme continues
automatically.
en
29

Advertisement

Table of Contents
loading

Table of Contents