Table of Contents
Advertisement
TO REMOVE PHONE FROM ADAPTER:
To save your alignment, make no further adjustments to the top clamp and alignment
knob. Simply remove phone using right clamp only as shown in Fig.4.
USING ADAPTER AGAIN:
The alignment of your phone to the adapter should be saved from the initial setup,
so many steps can be skipped (Fig.1–2, 7–11) and only a quick ne adjustment of the
alignment may be needed.
Frequently Asked Questions:
Q1: Why does the top clamp touch the round corner of my phone, instead of the top at edge?
A1: This is normal for some models of phones. Just t as close to rounded edge as
possible and lock top clamp as normal.
Q2: Why am I getting re ections and/or glare in my image?
A2: This may occur with indoor lighting. Please avoid overhead lighting or change the angle
of the lighting relative to phone. Also, please use without ash to avoid re ections and/
or glare in photos. If there's glare on your phone screen that makes image hard to view,
increase brightness setting on phone and view from a position with less overhead light.
11
Advertisement
Table of Contents
