Remote Operations (Only For Kd-S600); Installing The Batteries; Using The Remote Controller - JVC KD-S550J Instructions Manual

REMOTE OPERATIONS
This section is ONLY FOR KD-S600.
Before using the remote controller:
• Aim the remote controller directly at the remote sensor on
the main unit. Make sure there is no obstacle in between.
• Do not expose the remote sensor to strong light (direct
sunlight or artificial lighting).

Installing the batteries

R03(UM-4)/AAA(24F)

Using the remote controller

1
ATT
BAND
PROG
DISC
2
FUNC
DISC
PRESET
3
Note:
* These buttons cannot be used for
the clock (CLOCK H, CLOCK
M), SCM LINK, LEVEL and FM/
AM channel intervals (AREA)
adjustments (see pages 19, 15, 20
and 9).
22
Insert the ·
ends first.
1
Functions the same as the
2
4
Select the source.
Each time you press FUNC (function), the source changes.
3
5
*Functions the same as the control dial on the main unit.
4
• Functions as the BAND button while listening to the radio.
6
Each time you press the button, the band changes.
• Does not function as the PROG/DISC + button.
5
• Functions as the PRESET button while listening to the radio.
Each time you press the button, the preset station number
increases, and selected station is tuned in.
• Does not function as the DISC – button.
6
• Searches stations while listening to the radio.
• Fast forwards or reverses the track if pressed and held
while listening to the CD.
• Skips to the beginning of the next tracks or go back to the
beginning of the current (or previous tracks) if pressed
briefly while listening to the CD.
Remote sensor
When the controllable
range or effectiveness of
the remote controller
decreases, replace the
batteries – R03(UM-4)/
AAA(24F).
button on the main unit.