Active Storage mRAID16 Quick Start Manual page 15

Alarm indicator of the
mVault75: off
Power indicator of the
mVaullt75 : steady green
6 Initializing the mRAID16
After you have powered on the mRAID16, complete the following initialization steps:
1. Log in to the ActiveManager on the maintenance terminal using the IP address of the management network port.
2. Follow the Settings > Initial Configuration wizard to change the basic information, configure the system time, disk domain,
alarm notification and import license files.
l The default user name and password of the mRAID16 are admin and Active@active respectively.
l The command to change password is change user password.
7 Configuring the mRAID16
For system configuration, please download the mRAID16 Quick Configuration Guide for SAN or NAS from the
"Documents" section of our web site http://active-storage.com.
mVault75