Table of Contents
Advertisement
Connecting mVault75
l Connect two mVault75s using mini SAS HD electrical cables. The cables must be naturally bent and a minimum of
4" clearance must be reserved in front of each mVault75 for winding cables.
l mRAID16 Expansion and mVault75 cannot be connected to one expansion loop.
l Each expansion loop of mVault75 must be connected to two adjacent ports (excluding ports P1 and P2) of the 12
Gbit/s SAS interface module on a mRAID16, for example, ports P0 and P1 or ports P2 and P3.
Controller B
Expansion
module B
Controller A
mRAID16
mVault75 3
Expansion
module A
mVault75 2
mVault75 1
Advertisement
Table of Contents
