Table of Contents
Advertisement
User Manual
IP65 450m Analogue Wireless Video & Audio Link Pair
6. If "Program Timer" has been selected, the input LED flashes and the status LED's
7.
If at any point you wish to cancel out of the programming mode hold down the tamper
switch until all of the LED's switch off; this will exit programming mode without saving the
current setting.
7
indicate the selected option. To change the timer option briefly press the program key.
The timer options are as follows:
To save the new timer setting, hold down the program switch for 3 seconds. The 2
green LED's will flash twice to indicate the new setting has been saved.
Advertisement
Table of Contents
