Advertisement
Quick Links
2015+ WRX/STI License Plate Holder
For Cars With Front Mounted Intercooler
Thank you for purchasing this PERRIN product for your car! Installation of this product should only be performed by persons experienced with installation of aftermarket performance parts
and proper operation of high performance vehicles. If vehicle needs to be raised off the ground for installation, the installer must use proper jacks, jack-stands and/or a professional vehicle
hoist for safety of the installer and to protect property. If the vehicle is lifted improperly, serious injury or death may occur! Please read through all instructions before performing any
portion of installation. If you have any questions, please contact our tech department prior to starting installation. We can be reached in any of the following methods:
SPECIAL NOTES
•
Thank you for purchasing the PERRIN Performance Front License Plate Relocation Kit. Please read through all the instructions before performing the installation. Because this
kit removes the OEM tow hook from the car, it's a good idea to keep spare tools in the car to remove the kit in case of emergency.
•
This kit is designed to work with cars that do not have a lower front grill installed and the OEM bumper beam removed. Access to backside of bumper is necessary to install this
part. If lower front grill is installed, this will need to be removed to complete the installation. Alternatively, the lower splash guard can be removed to reach back side of
bumper.
•
PERRIN License Plate Relocate must be removed when going through automated car wash or damage will occur to plate relocate!
Parts Included with the PERRIN Front License Plate Holder:
•
(1) PERRIN Offset Plate Holder
•
(1) PERRIN 2015+ Bumper Plug Front
•
(1) PERRIN 2015+ Bumper Plug Rear
•
(1) Black Spacer
•
(1) M10x40 Hex Bolt
•
(4) M6x10mm Button Head SS Screws
•
(4) M6 SS washers
•
(7) 7/16" SS Flat washers, Black Oxidized
•
(1) M4 Hex Key
•
(1) PERRIN Plate Frame
Installation of PERRIN License Plate Holder:
1)
Locate and remove front tow hook cover on front bumper. Take care in removing or damage to your paint can occur. A small flat head
screwdriver with a towel behind it to pry against the bumper is a good way to reduce the chances of damage.
2017-03-15
Email
Tech@PERRINperformance.com
Instant Chat off the main page of
www.PERRINperformance.com
Or simply call our tech team at 503-693-1702
Advertisement
Related Manuals for Perrin PSP-BDY-202F
Summary of Contents for Perrin PSP-BDY-202F
- Page 1 2017-03-15 Thank you for purchasing this PERRIN product for your car! Installation of this product should only be performed by persons experienced with installation of aftermarket performance parts and proper operation of high performance vehicles. If vehicle needs to be raised off the ground for installation, the installer must use proper jacks, jack-stands and/or a professional vehicle hoist for safety of the installer and to protect property.
- Page 2 Take note of PERRIN Bumper Plugs and the grained finish on them. This grained finish is what faces the outside of the car on the front plug and faces the back of the car on the rear plug (or duller sides face each when assembled). This is important to note as this determines their orientation on the car.
- Page 3 Do this until PERRIN License Plate Holder feels secure. Check that PERRIN License Plate Holder does not interfere with car in anyway, or damage WILL occur. If plate needs to be moved away from car, add washers between black spacer and PERRIN License Plate Holder.