Download Print this page

Specification - Logitech 200 MKIII Series User Manual

Tachometer

Advertisement

Specification

Display
Display Update
Decimal point
Scaling
Signal inputs (A and B)
Standard sensitivity mode
High sensitivity mode
Frequency Mode
Ratio Mode
Impedance
Accuracy
Optional Outputs
2 x Configurable Alarms
Digital Pulse
Analogue Voltage & Current User selectable as
Connections
Power requirement
DC
Temperature range
Dimensions
Weight
4 decade 7-segment high brightness red LED, 14mm high
Programmable via display to 100ms, 250ms, 500ms or 1s
Programmable via display
Programmable via display, retained in non-volatile memory.
Protected to 100V
From 90mV @ 10Hz, 170mV @ 1kHz, 870mV @ 10kHz
From 12mV @ 10Hz, 20mV @ 1kHz, 70mV @ 10kHz
1Hz minimum (standard model)
40kHz maximum with single input (200Hz in Reed Mode)
1Hz minimum (standard model)
20kHz maximum with dual inputs (200Hz in Reed Mode)
15kΩ minimum
<0.01% with square wave at 1V peak
60Vdc maximum, 200mA maximum (open collector)
Pulse to supply, 200mA maximum
Screw terminals on rear panel.
12 to 30Vdc via power connector or Vs and 0V terminals
Operating
Storage
96 x 48 x 72mm (panel cut-out 92 x 43mm).
150g
2
0 - 5V, or 1 - 5V, or 0 - 10V, or 2 - 10V
0 - 20mA, or 4 - 20mA
-20°C to +70°C
-20°C to +85°C

Advertisement

loading

This manual is also suitable for:

200t/dc