Sensitivity
[Default 45]
Press and hold the increment button
↑
(B), then press the select
←
button (A) to enter
sensitivity mode. The display will show
SENS
and then the current value is displayed.
Sensitivity ranges from 0 (least sensitive) to 63 (most sensitive). Press select
←
to
reduce the value or increment
↑
to increase it. After 2s of neither button being touched
the unit will apply the selected sensitivity value and return to run mode. It is
recommended that the sensitivity level is set only as high as necessary to obtain a
steady signal. This minimises the risk of detecting spurious signals.
10