Table of Contents
Advertisement
16.11 CR16 MECHANISM ASSEMBLY
PROCEDURE
The following specified greases and/or oil must be applied when some specific parts are changed.
1.
Floil grease (VFK1298) : The floil grease must be applied to tray, tray (L) and tray (R).
2.
Hanarl oil (VFK1700) : The hanarl oil must be applied to any parts with grease other than the said parts.
l
Follow the (Step 1) - (Step 2) of Item 16.3.
l
Follow the (Step 1) - (Step 2) of Item 16.4.
l
Follow the (Step 1) - (Step 5) of Item 16.6.
l
Follow the (Step 1) - (Step 10) of Item 16.10.5.
Follow the (Step 1) - (Step 4) of Item 16.10.6.
l
l
Follow the (Step 1) - (Step 22) of Item 16.10.7.
Advertisement
Table of Contents
