2 Before Repair and Adjustment
(Using Active Subwoofer Unit)
Disconnect AC power, discharge Power Supply Capacitors C546 , C547, C548 & C549 (from active subwoofer unit)
through a 10 Ω, 1W resistor to ground.
DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices.
After repairs are completed, restore power gradually using a variac, to avoid overcurrent.
Current consumption at AC 120V, 60Hz in NO SIGNAL mode should be ~1000 mA [From Active Subwoofer].