Whirlpool R-92 Manual page 17

h) If you do not want to completely re-
move the ice maker rotate the ice
maker so the square end with the mo-
tor faces the front, and hang the flange
of the ice maker on the track that is at-
tached to the freezer mullion.
Front of
Ice Maker
3. To remove the water fill tube:
a) From the rear of the unit, disconnect the
upper water line from the fitting. To re-
move the tube, press down on the lock-
ing ring at the top until the tube is re-
leased.
Upper Water Line
Press Down
On Locking
Ring
Water Line
Fitting
Track
Flange
Rear of Unit
4-3
b) Slowly pull the end of the water fill
nozzle out of the fitting in the top of the
freezer liner, then continue to pull the
rest of the tube out of the liner. It will
require some force to remove the first
foot or so of tube from the liner. NOTE:
If the fill tube has water frozen inside, it
will be necessary to melt the ice before
removing the tubing, otherwise the tub-
ing will tear when it is removed. Follow
step 4 to melt the ice. If the fill tube is
free of ice, skip step 4.
Shoulder
Water Fill Nozzle
4. To melt ice inside the water fill tube:
a) Fill a plastic squeeze bottle with hot
water.
b) Place a container below the water fill
nozzle.
Continued on the next page.
Pull Tube
Out Here