Home office computer desk with monitor shelf (8 pages)
Summary of Contents for Noblewell NWOC6
Page 1
---------------------------- 19-24 Italiano ---------------------------- 25-30 Thank you for choosing this NOBLEWELL product! At NOBLEWELL we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us at...
• Check package contents against supplied parts and hardware list to assure that all components were received undamaged. Do not use damaged or defective parts. lf you require replacement parts, please contact NOBLEWELL customer service at supportus@noblewellfurni.com. • Carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact customer service at supportus@noblewellfurni.com.
Seat Armrest Seat Plate Backrest Bolt Bolt M6X30mm Headrest M6X15mm Bolt Bolt 13/64 in (5mm) Allen Key M8X20mm Installation Steps Press the caster [04] hard Insert the legs [01] into the until it clicks into the hole on leg connector [02]. the leg.
Page 4
Attach the decorative cover [03] to the leg connector [02], then press the gas lift cylinder [05] into the leg connector [02]. Place the armrests [07] to the seat at your desired position, then secure the armrests in place by tightening the bolts [B] with the Allen key [E]. NOTE: Ensure the leveler control is pointing to right side in this step.
Page 5
Secure the seat plate [08] on the seat [06] by tightening the bolts [C] with the Allen key [E]. Back You may need assistance with this step. The 1st person holds the seat while the 2nd person assembles the seat plate. Insert the backrest [09] at your desired position, then secure the backrest [09] in place by tightening the bolts [C] with the Allen key [E].
Page 6
Insert the headrest [10] into the center of the backrest frame, then secure it into place by tightening the bolts [D]. HEAVY! You may need assistance with this step. The 1st person holds the seat while the 2nd person assembles the headrest. Align the hole on seat plate with gas lift cylinder, then press the seat down to secure it to gas lift cylinder.
Adjustment A. HEADREST Tilt Adjustment: Hold the headrest to adjust it to your desired angle. Height Adjustment: Hold and lift or lower the headrest. B. ARMREST Height Adjustment: Lift the armrest height adjustment buttons to raise or lower the armrests. Swivel Adjustment: Hold the front of the armrests and swivel them in an inward or outward position...
Page 8
Thank you again choosing this NOBLEWELL product! All of us at NOBLEWELL do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manu- facturing it for you. We strive to provide you with the best quality products and services in the industry.