Table of Contents
Advertisement
Message
This program is not allowed to
be recorded on this disc.
This disc is protected and not
recordable.
Disc is full.
(No area for new recording)
You cannot record more than
99 titles on one disc. (The
maximum is 99.)
You cannot record more than
999 chapters on one disc.
(The maximum is 999.)
You cannot record on this as
Control Information is full.
You cannot record on this disc
as Power Calibration Area is
full.
This disc is already finalized.
Can not record on this disc.
You cannot record more than
49 titles on the disc. (The
maximum is 49.)
You cannot record more than
254 chapters on the disc. (The
maximum is 254.)
This program is not recordable
in +VR mode.
The disc has no recording
compatibility. Set "Make
Recording Compatible" to
"ON" to convert the disc.
You cannot record more than
600 titles on HDD. (The
maximum is 600.)
Can not record on this HDD.
If an error occurs during the timer recording, one of the following error numbers (40 to 42) or the above error
messages (error number: 1 to 39 and 43 to 46) is displayed on the recording menu after timer recording.
(Once the screen of the program line is exited, the program line for the error will be cleared.)
(No Error Message is displayed for errors No. 40 ~ 42.)
A program with an error number is grayed out and asterisked on the timer programming list.
Solution
You cannot record cop-y
prohibited programs.
Release the disc protection
setting in the Disc Setting
menu.
Insert a recordable disc with
enough recording space.
Delete unnecessary titles.
Delete unnecessary chapters.
Insert a new disc.
Insert a new disc.
Release the finalizing for this
disc.
Repeat the same operation.
Delete unnecessary titles.
Delete unnecessary chapter
marks.
You cannot record copy-
prohibited programs.
Set "Make Recording
Compatible" to "ON" to convert
the disc.
Delete unnecessary titles.
Connect HDD.
Delete unnecessary
programs.
Ti
mer Programming
JAN / 5/07 12:14AM CH4 SP
SP (1:00)
error number
JAN
New Program
Error
Error Description
No.
During the CGMS picture input. (VR
28
Format Disc)
29
Disc Protected Disc.
30
No available recording space.
The 99 title limit has been reached.
31
(Video Format Disc)
The 99 title limit has been reached. (VR
32
Format Disc)
999 chapter limit has been reached. (VR
33
Format Disc)
No available recording space for Control
34
Information.
35
PCA is Full. (in REC start)
36
It is finalized. (Video Format Disc)
37
Access to outside of Memory Area.
38
Sector Address is wrong.
39
BUP writing error of chapter editing.
The 49 title limit has been reached. (+VR
43
Format Disc)
The 254 chapter limit has been reached.
44
(+VR Format Disc)
During the CGMS picture input (+VR
45
Format Disc).
Trying to record onto the +VR formatting
disc that had been recorded by the other
46
recorder when "Make Recording
Compatible" setting is "OFF",
The 600 title limit has been reached
47
(HDD).
48
Recording without HDD connected.
49
HDD is Full.
FRI JAN/05 12:17AM
AM
14AM
4
1-9-2
Priority
-
6
10
-
-
-
-
4
8
-
-
-
9
10
12
7
-
-
-
E2H00FIS
Advertisement
Table of Contents
