Cotech JF4011G Operating Instructions

LED Work Light
Art.no 36-5731 Model JF4011G
Please read the entire instruction manual
before using the product and then save it
for future reference. We reserve the right
for any errors in text or images and any
necessary changes made to technical data.
In the event of technical problems or other
queries, please contact our Customer
Services.
Safety
• Do not subject the light to knocks
and blows.
• Make sure that the mains lead does
not come into contact with sharp
edges or hot surfaces and is not
crushed or damaged in any other way.
• The LEDs cannot be replaced.
• The mains lead should be checked
regularly. Never use the light if
the mains lead or plug is damaged.
The mains lead must be changed if
damaged. This is to prevent the risk of
electric shock or fire and should only
be carried out by the manufacturer,
qualified service facility or qualified
technician.
• Always unplug the product from
the power point when it is not in use.
Pull the plug, not the lead.
• The work light must not be dismantled
or modified in any way.
GREAT BRITAIN • CUSTOMER SERVICE contact number 0845 300 9799
e-mail customerservice@clasohlson.co.uk internet www.clasohlson.com/uk
Operating instructions
The light has no power switch and is
switched on and off by plugging it in and
unplugging it from the electrical socket.
The light must only be used with earthed
electrical sockets.
Care and maintenance
Clean the light using a lightly
moistened cloth. Use only mild cleaning
agents, never solvents or corrosive
chemicals.
Disposal
This product should be disposed of in
accordance with local regulations. If you are
unsure how to proceed, contact your local
council.
Specifications
Power supply
Cable length
Luminous flux
Colour temperature 6500 K
IP rating
Length
230 V
5 m
700 lm
IP44
46 cm