Cotech ZM7705COB Series Instruction Manual
Cotech ZM7705COB Series Instruction Manual

Cotech ZM7705COB Series Instruction Manual

Rechargeable led work light

Advertisement

Available languages
  • EN

Available languages

Rechargeable LED
Work Light
Art.no 18-1404/36-6528
Model ZM7705COB
Please read the entire instruction manual before use and
then save it for future reference. We reserve the right
for any errors in text or images and any necessary
changes made to technical data. In the event of
technical problems or other queries, please contact our
Customer Services.

Safety

Do not subject the light to knocks or shocks.
The light bulb cannot be replaced.
This product must not be dismantled or modified
in any way.
Do not use the product if it or its charger is
damaged in any way.
Only use the supplied charger cables.

Instructions for use

Charging

Note: Charge the light for 6–8 hours before using it for
the first time. Switch the light off when charging.
1.
The work light comes with a mains adapter for
the EU and UK.
2.
Connect the charger cable to the mains adapter
and to the work light.
3.
Plug the mains adapter into a wall socket.
The charging indicator on the work light will
shine red. Optionally, you can connect the charger
cable to another USB charger.
4.
The indicator shines green once the battery is fully
charged.
5.
Disconnect the mains lead from the wall socket and
remove the charger cable from the light.

Care and maintenance

Clean the product using a lightly moistened cloth.
Use only mild cleaning agents, never solvents or
corrosive chemicals.
If the light is not to be used for a long time,
the battery should be fully charged every 4 to
5 months to prolong its capacity.
GREAT BRITAIN • CUSTOMER SERVICE tel 020 8247 9300 e-mail customerservice@clasohlson.co.uk
internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

Troubleshooting guide

The light does
The built-in battery is flat.
not work.
Charge the battery.
The light will
Is the mains lead or plug
not charge.
damaged?
The indicator
Is the mains lead properly
does not
connected to the work light
come on.
and the wall socket?
Is the mains adapter properly
plugged into an electrical
socket?
Is the wall socket live?
If you are using another USB
charger, is this intact?

Responsible disposal

This symbol indicates that this
product should not be disposed
of with general household waste.
This applies throughout the entire
EU. In order to prevent any harm to
the environment or health hazards
caused by incorrect waste disposal,
the product must be handed in for
recycling so that the material can be
disposed of in a responsible manner.
When recycling the product, take it to
your local collection facility or contact
the place of purchase. They will ensure
that the product is disposed of in
an environmentally sound manner.

Specifications

LED Bulb
2 W, 170 lm, 4000 K
IP rating
IP20
1800 mAh li-ion
Rechargeable battery
Mains adapter
Input: 100–240 V AC, 50/60 Hz
Output: USB: 5 V, 1 A
3–4 hours (6–8 hours
Charging time
before initial use)
Operating time
Approx. 3 hours
Operating temperature −15 to 40 °C
Length
42.5 cm (including hook)
Weight
200 g

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZM7705COB Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Cotech ZM7705COB Series

  • Page 1: Troubleshooting Guide

    Rechargeable LED Troubleshooting guide The light does • The built-in battery is flat. Work Light not work. Charge the battery. The light will • Is the mains lead or plug Art.no 18-1404/36-6528 not charge. damaged? The indicator • Is the mains lead properly Model ZM7705COB does not connected to the work light come on.
  • Page 2 Laddbar arbets­ Felsökningsschema Belysningen • Det inbyggda batteriet är belysning LED fungerar inte. urladdat. Ladda batteriet. Det går inte att • Är batterieliminatorn och Art.nr 18-1404/36-6528 ladda arbets- laddkabeln oskadade? belysningen, • Är laddkabeln ordentligt Modell ZM7705COB laddindikatorn ansluten till batterieliminatorn tänds inte. och till arbetsbelysningen? Läs igenom hela bruksanvisningen före användning och •...
  • Page 3 Arbeidslampe LED, Feilsøking Lampen • Det innebygde batteriet ladbar virker ikke. kan være utladet. Lad opp batteriet. Art.nr. 18-1404/36-6528 Arbeidslampen • Er batterieliminator og vil ikke lades strømkabel skadet? Modell ZM7705COB og lade- • Er strømkabelen koblet riktig til indikatoren batterieliminator og lampe? Les brukerveiledningen grundig før produktet tas i bruk tennes ikke.
  • Page 4 Ladattava työ­ Vianhakutaulukko Valaisin ei toimi. • Akku on lopussa. valaisin LED Lataa akku. Työvalaisimen • Ovatko muuntaja ja Tuotenro 18-1404/36-6528 lataaminen latauskaapeli ehjiä? ei onnistu, • Onko latauskaapeli liitetty Malli ZM7705COB latauksen kunnolla muuntajaan ja merkkivalo työvalaisimeen? Lue käyttöohje ennen tuotteen käyttöönottoa ja säilytä ei syty.
  • Page 5 Aufladbare LED­ Fehlersuche Das Gerät Der integrierte Akku ist möglicherweise Arbeitsleuchte funktioniert entladen. Den Akku aufladen. nicht. Art.nr. 18-1404/36-6528 Das Gerät • Überprüfen, ob Netzkabel kann nicht und/oder Ladekabel Modell ZM7705COB aufgeladen unbeschädigt sind. werden, • Sicherstellen, dass Vor Inbetriebnahme die komplette Bedienungsanleitung die Lade- das Ladekabel korrekt durchlesen und aufbewahren.

Table of Contents