JVC GR-AX210EA Instructions Manual page 31

ORIGINAL TAPE (camcorder)
1 3
IN OUT IN OUT
EDITED TAPE (VCR)
SUPPLEMENTAL INFORMATION ON THE REMOTE CONTROL
Player (JVC VCR)
To Editing cable
R.A.EDIT (3.5 ø -3.5 ø,
provided)
To
PAUSE IN
RM-V704U
(optional)
Untitled-2
AUTOMATIC EDITING TO VCR
2
IN OUT
1
2
EDIT STOP
3
NOTES:
Using the RM-V704U remote control, it is also possible to
perform deck-to-deck Random Assemble Editing. The
AV OUT
playback deck must be an R.A. Edit-capable JVC VCR. The
recording deck can be...
a VCR other than JVC, or
a JVC VCR which has neither a Remote PAUSE nor an R.A. EDIT
connector
How to use:
AV IN
— Connect the playback deck and RM-V704U as shown on the
left.
Recording deck
— Set the RM-V704U to correspond to the brand of the recording
deck. (
— For Random Assemble Editing procedure, please refer to the
instruction manual of the JVC VCR you are using as the
playback deck.
Notes:
RM-V704U cannot be used to control the playback deck.
RM-V704U is capable of controling basic operations of the
recording deck. While pressing VCR CTL, press PLAY, STOP,
PAUSE, FF or REW for these functions. (Not possible with some
brands and models). Other buttons cannot be used.
To put the recording deck in the Record-Pause mode, use the
controls on the recording deck itself.
31
ENGAGE VCR'S RECORD–PAUSE
MODE
Point the remote control toward the VCR's infrared
sensor and press VCR REC STBY, or manually
engage the VCR's Record-Pause mode.
BEGIN AUTOMATIC EDITING
Press EDIT on the camcorder, and the previously
selected scenes are copied to the VCR in the
specified order.
END AUTOMATIC EDITING
When all selected scenes have been copied, the
camcorder and VCR enter the still or pause mode.
Press STOP on both units.
If you performed step 1C on page 29, keep the remote
control pointed at the VCR during editing.
The on-screen display only appears while the
camcorder searches for each scene.
To dub a copy of the camcorder's (source) tape,
perform R.A.EDIT by specifying only one in-point
(and no out-point). The contents of the tape from the
specified in-point to the end of the tape are
automatically copied.
There may be noise at in- or out-points on the edited
tape with certain VCRs.
P. 29)
96.10.8, 2:18 PM
31