Advertisement
Quick Links
TIDAL WAVE
QUICK START GUIDE
Data
Ports 1 and 5 are LAN ports.
Data
Data
Ports 2, 3, and 4 are WAN ports.
Cellular
Antenna
2.4GHz
1 Gig PoE
Antenna
Ethernet Port
How to Configure/Operate
1. Plug one end of the ethernet cable provided into the ethernet port of the unit.
2. Plug the other end of the ethernet cable into the PoE (Power Over Ethernet) injector.
3. Plug the power supply into the PoE injector (Both lights on the PoE should show solid green).
4. Plug the PoE injector into the ethernet port of a laptop, computer or router.
TIP: When plugging into a router it will be the Internet (WAN) port.
Connecting to Internet via physical connection
1. Open a web browser and type in 192.168.89.1 in the URL bar at the top.
2. From the network scan page, connect to a network that you are familiar with.
3. The connection should read, "(Three dots)..., Checking IP, Got Internet".
4828 NE 12th Avenue, Oakland Park, Florida 33334-4804 • 1.954.928.1310 • support@wavewifi.com
Cat5 Ethernet Cable
Cat5 Ethernet Cable
5GHz
Antenna
Wi-Fi Antennas must be
mounted 15 - 25ft off the
waterline.
Cat5 Ethernet Cable
Accessories
x2 Dual Band Antennas
x2 Low Loss 400 Cable
Cell Antenna Kit
x2 Spare N Connector
Cellular Antenna
x2 Wifi Antenna
Cat5e Ethernet Cable
12V Power Supply
PoE Injector
Notch
Insert SIM Card with
in first and
Contacts
faced up toward blue light.
Data Only
Non-E911 SIM
Contact
Notch
Page 1
Advertisement
Related Manuals for Wave wifi TIDAL WAVE
Summary of Contents for Wave wifi TIDAL WAVE
- Page 1 TIDAL WAVE QUICK START GUIDE Data Accessories Ports 1 and 5 are LAN ports. Wi-Fi Antennas must be mounted 15 - 25ft off the waterline. x2 Dual Band Antennas Cat5 Ethernet Cable Data Data Ports 2, 3, and 4 are WAN ports.
- Page 2 Connecting to the TIDAL WAVE Connect the TIDAL WAVE ethernet cable to your computer’s Ethernet port or to a router. If using a router make sure that your laptop or tablet is WIRELESSLY connected to the Router. If your computer is directly connected via ethernet cable to the TIDAL WAVE, then after several seconds your computer should receive an IP address from the system.
- Page 3 You may have to reconnect after a reboot if the hotspot is not a favorited network. You can also assign a static IP to the TIDAL WAVE. (Please be sure that you understand IP addressing when changing this function.) (See Figure 2c.) Cellular Configuration 1.
- Page 4 TIDAL WAVE QUICK START GUIDE FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.