Wave wifi MNC Series Quick Start Manual

MNC Series 1200/1250
Quick Start Guide
Accessories
12VDC 2A
Ethernet Patch Cable
Power Adapter
x2 Cell Antennas
(MNC-1250 ONLY)
HOW TO CONNECT:
1. Connect to your MNC system (Blue Port)
2. Open a supported browser such as Mozilla Firefox or Google Chrome.
3. In the URL at the top of the browser type in the IP address "192.168.101.1"
4. This should open the "Device Status" page from here you can see the di erent ports and their connections.
USER ACCESS MANAGEMENT (BE SURE TO READ ALL NOTES ON THIS
Connected Users - Choose your settings based on security needs and parameters.
• Allow open Internet access (no login required)
Allow Internet access with agreement to disclaimer
•
• Allow Internet access using login codes and MAC authentication
• Allow Internet access using MAC authentication only
Note: If you choose either options "B or C," it is recommended that you instruct all users to navigate to
http://signon.internet to access the disclaimer or login page in order to successfully log in to access the internet.
You can also BLOCK or WHITELIST
go through the disclaimer process. Blocking on this page is only temporary. To fully block an address do so on the MAC MANAGEMENT page.
Login Codes - Codes given to users in order for their devices to connect and gain internet access.
Login Code
• - Does not have to be a numerical value
• Description - Our suggestion is to put the name of the user and the device or the name of the crew / group who will be using the code.
• Download/Upload Rate - The highest restriction allowable is 75Mbps or MAX
Ethernet Ports
Guest
Cellular
VSAT
Wave WiFi
SIM Card
5GHz
2.4GHz
Access Point
Access Point
with the ethernet cable provided for initial connection and troubleshooting purposes.
PAGE):
- No restricting data usage to any devices on the network.
- All devices that connect to the system must agree to terms before usage.
- Restricting data usage based on login codes and MAC authentications previously set up.
- Restricting access to allowed MAC IDs only
devices. Whitelisting a device means that no matter how you set the users it will always be allowed onto the network and will not have to
4828 Ne 12th Avenue, Oakland Park, Florida 33334-4804 • 1.954.928.1310 • support@wavewi .com
WHEN INSERTING SIM
Main LAN 12VDC
Cellular
Use the SIM Tool to
push the the SIM Card
further into the MNC
until you hear a click sound
Quick Tips
THIS SIDE UP
1. Allow for the MNC system to be turned on for at
Standard SIM least 30 secs before plugging any sources into it.
Orientation
2. Initial setup should be done with a Laptop.
3. Hover over or click on the
4. Only use the 12V
5. 1250 ONLY - Cell antennas MUST be connected to
the unit in order for the system to authenticate the
SIM.
6. When using mobile devices make sure that
'autocorrect' does not change sensitive information
that you are typing in. Ex. "APN ".
for brief explanations.
2A power supply provided