Advertisement
Quick Links
Advertisement
Related Manuals for DigiWeigh A12
Summary of Contents for DigiWeigh A12
- Page 1 1.1 FRONT AND BACK VIEW OF THE INDICATOR Front View Back View A12-51007 V1.0...
- Page 2 1.2 KEY FUNCTIONS [UNIT] Switch between weighing units. [FUN] Select or enter the function and save the setting values of parameters. In counting mode, press to view unit weight, counts and total weight when “F3 Key”=1. In the accumulation mode, press to view numbers when “F3 Key”=2.
- Page 3 (Graph 2-3) Drawing of connecting of load cell Chapter 2 Operation 2.1 POWER ON AND AUTO ZERO-SETTING 1 The indicator will perform countdown self-checking when turned on. Then it will enter weighing mode. 2 When powered on, if loading weight on the scale deviates from the zero point, but still within zero set range, the indicator will set zero automatically;...
- Page 4 In weighing mode, press [FUN] key to enter accumulating mode. Place the first item onto the scale and wait until the STAB sign on. Press MOD key to store the weight into memory. Remove the first item and place the second item onto the scale then repeat the previous procedure.
- Page 5 Beep 2: Beep when the weight falls into the weight range. Beep 3: Beep when the weight falls out of the weight range. Press [TARE] key to select desired mode then press [FUN] key to set High-limit: Now there are 6 zeros on the screen. Press [ZERO] key to move the editable digit (blinking) and press [TARE] to change the value.
- Page 6 when the stable signal is on, it displays [End] and keeps the original full range point calibration. Press the calibration switch under the lead sealing board at the back of the indicator, it saves the setting and back to the weighing status. 3.2.2 Fast calibration for full range point: At any time before it shows [AdLOAD], press [ACCU], it keeps the original division, decimal point, full range, zero point calibration and enter into the full range point...
- Page 7 Chapter 6 Maintenance 6.1 To guarantee indicator clarity and using life, the indicator shouldn’t be placed directly under sunshine and should be set in the plain space. 6.2 The indicator can’t be placed into the place where the dust pollution and vibration are serious.