Table of Contents
Advertisement
Changing Sander Frame Angle
Among the other innovative features of our unit is the ability to change positions of the frame. This means you
can have the most flexibility to comfortably perform the task at hand.
DISCONNECT POWER BEFORE ATTEMPTING TO CHANGE THE ANGLE OF THE FRAME.
Remove the abrasive belt.
Remove the 3 of the 4 mounting bolts. Securely grasp the frame and remove the last bolt. Using the babbit as
a guide, rotate the frame in 45 degree increments to the closest indexed position of the desired angle.
Lower Mounting Bolts
Reattach the mounting hardware securely. The frame must be sitting flat against the C-face of the motor or
belt tracking will be severely running o
8
Advertisement
Table of Contents
