Use Without Tool Rest - PCE Health and Fitness DeBurr-It! 248-3 User Manual

Using the Sander Without Tool Rest
There are plenty of applications where you would need to remove the tool rest. Always use extreme caution
when operating without a tool rest as its possible your work piece could get away from you and cause damage
to the user, to something else or someone else.
Removing the tool rest.
Turn the machine off and remove the belt. Remove the lower spindle knob completely. Remove the tool rest
and put in place the supplied precision washer.
Reinstall the lower spindle knob and tighten as you would if the tool rest was there. Reinstall the belt and
perform the retensioning procedure.
Exploded and Assembled Views
To operate turn on the unit. Only use enough pressure against the abrasive belt so you do not loose control of
the part you are working. Easier access to the lower idler wheel is now available. You can use this wheel just as
any grinding wheel.
11