Table of Contents
Advertisement
Cleaning
Abrasive dust can be hazardous to your health as well as other people and animals. Always wear a breathing
dust mask when sweeping up debris as well as cleaning the unit. Avoid using high pressure compressed air as
it will make this abrasive dust airborne.
Wipe down the unit will a clean soft dry cloth, such as a tshirt rag. Using low pressure compressed air (<15
psi) blow off bearings and around the drive pulley. Too much pressure could pop the dust seals off of the
bearings.
Wipe down the unit completely again with a clean rag and a mild cleaner such as Simple Green.
!!IMPORTANT!! – DO NOT WASH DOWN THE SANDER WILL RUNNING WATER.
After giving the unit a good cleaning, check all mounting bolts for tightness, as well as spindles and mounting
hardware. Tighten if necessary.
13
Advertisement
Table of Contents
