Table of Contents
Advertisement
●
Disconnect all cables when carrying the TV.
●
Carry the TV with the adequate number of people; larger size TVs require two or more people.
●
Correct hand placement while carrying the TV is very important for safety and to avoid damage.
When repairing the LCD Panel, be sure you are grounded by using a wrist band.
When installing the LCD Panel on a wall, the LCD Panel must be secured using the 4 mounting holes on the Rear Cover.
1.
Do not press on the panel or frame edge to avoid the risk of electric shock.
2.
Do not scratch or press on the panel with any sharp objects.
3.
Do not leave the module in high temperatures or in areas of high humidity for an extended period of time.
4.
Do not expose the LCD Panel to direct sunlight.
5.
Avoid contact with water. It may cause a short circuit within the module.
6.
Disconnect the AC power when replacing the backlight or Inverter circuit.
(High voltage occurs at the Inverter circuit at 650Vrms).
7.
Always clean the LCD Panel with a soft cloth material.
8.
Use care when handling the wires or connectors of the Inverter
circuit. Damaging the wires may cause a short.
9.
Protect the panel from ESD to avoid damaging the electronic
circuit (C-MOS).
10. During the repair,
DO NOT leave the Power On for more than
1 hour while the TV is face down on a
XBR-65HX955
SETTING UP AND CARRYING THE TV
USE CAUTION WHEN HANDLING THE LCD PANEL
cloth.
CAUTIONS AND WARNINGS
iv
Advertisement
Table of Contents
