Table of Contents
Advertisement
SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION
LOOP STAND REMOVAL
A Lift up the TV and gently place it face down onto a soft cloth. Remove the 2 screws from the H, Cover (4LG).
B Slide up and remove the H, Cover.
C Remove the 4 screws from the Loop Stand (4LG).
D Slide and remove the Loop Stand.
A
Soft Cloth
B
D
LOOP STAND (4LG)
XBR-65HX955
C
Components not identified by a part number
The component parts of an assembly are indicated by
or description are not stocked because they
the reference numbers in the far right column of the
are
seldom
required
for
routine
service.
parts list and within the dotted lines of the diagram.
NOTE:
The
components
identified
by
shading and
mark are critical for safety.
!
Replace only with part number specified.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1
4-423-512-01
H, COVER (4LG)
2
A-1894-708-A
STAND BLOCK LOOP (4L)
*
Items marked with an asterisk are not stocked
since they are seldom required for routine service.
Expect some delay when ordering these components.
NOTE: The components identified by a red outline and a
contain confidential information. Specific instructions must be
adhered to whenever these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1
2
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
▲
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH STAND, LOOP TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV.
CAUTION: These screws cannot be used to secure the TV to the Wall
Mount Brackets.
▼
2-580-602-01
SCREW, +PSW M4X12
(SCREWS TO ATTACH H, COVER TO STAND LOOP)
mark
17
Advertisement
Table of Contents
