Osc Page - RME Audio Digiface Ravenna User Manual

18.7.3 OSC Page

The OSC page has four independent settings for up to four MIDI remote controls via Open Sound
Control (OSC). This is a network based remote protocol that can be used for example by Apple's
iPad with the app TouchOSC or Lemur to wirelessly remote control TotalMix FX running on a Mac
or Windows computer.
Index
Select one of four settings pages and thus remote controls. Settings are remembered automati-
cally. To activate or deactivate any of the four remote controls check or uncheck 'In Use'.
TotalMix FX OSC Service
 IP. Shows the network address of the computer running TotalMix FX (local host). This ad-
dress must be entered on the remote side.
 Host Name. Local computer name.
 Port incoming. Must match the remote
entry 'Port outgoing'. Typical values are
7001 or 8000.
 Port outgoing. Must match the remote
entry 'Port incoming'. Typical values are
9001 or 9000.
Remote Control
 IP or Host name. Enter the IP or host
name of the remote control. Please note
that the IP number usually works better
than the host name.
Options
 Send Peak Level. Activates the transmis-
sion of the peak level meter data. Peak
Hold activates the peak hold function as
set up for the TotalMix level meters in the
preferences.
 Lock Remote to submix. When acti-
vated the current remote control can only
modify the submix selected from the drop-
down list. This prevents havoc in multi-re-
mote monitoring environments.
 Number of faders per bank. Available
choices are 8 (default), 12, 16, 24, 32 and
48. Note that when working in underper-
forming networks, especially wireless, a
higher number of faders might not work
as smooth as expected.
48
User's Guide Digiface Ravenna © RME