Advertisement
Quick Links
Advertisement
Related Manuals for Beta 1498MN/12
Summary of Contents for Beta 1498MN/12
- Page 1 1498MN/12 INSTRUCTIONS FOR USE...
- Page 3 Clamps + / - Anti Recharge Diode Connector FUSE DUAL CHARGE RISK OF DAMAGE...
-
Page 4: Important Safety Measures
INSTRUCTIONS FOR USE CAUTION: Recharge the emergency booster for at least 5 hours immediately after purchase, and after each use. If not in use, recharge the emergency booster at least once a month for 5 hours, to keep the internal battery perfectly efficient. Never leave the emergency booster flat for prolonged periods of time;... - Page 5 INSTRUCTIONS FOR USE • Before starting the vehicle, turn off the lights and any running accessories. • CAUTION: Never allow the clips of the two clamps (positive-red and negative-red) to touch together. • CAUTION: Never reverse polarity. Always connect the output lead with red clamp (+) to the positive post of the battery, and the output lead with black clamp (-) to the vehicle’s chassis.
-
Page 6: Troubleshooting
INSTRUCTIONS FOR USE HOW TO USE THE EMERGENCY BOOSTER Using the emergency booster to start vehicles 1. Always wear protective goggles and keep your face away from the battery during connection operations. 2. Check that the installed battery is a 12V. CAUTION: IF THE VOLTAGE OF THE EMERGENCY BOOSTER DOES NOT MATCH THE VOLTAGE OF THE VEHI- CLE’S SYSTEM, AN EXPLOSION, OR DAMAGE TO THE VEHICLE, THE PRODUCT AND PEOPLE COULD OCCUR. - Page 7 INSTRUCTIONS FOR USE USING THE LED LAMP Move the ON/OFF switch to the ON position and press button STEADY LIGHT: press button for 3 seconds. FLASHING LIGHT: press button for 1 second. SOS EMERGENCY LIGHT: press button for 1 second. To turn the LED lamp off, press button for 1 second, and move the ON/OFF switch to the OFF position.
Need help?
Do you have a question about the 1498MN/12 and is the answer not in the manual?
Questions and answers