Step E - Install Reverse Osmosis Faucet - Whirlpool WHER25 Operation Manual

Reverse osmosis drinking water system

Hide thumbs Also See for WHER25:

Table of Contents

SELECTLOCATIONOFREVERSEOSMOSIS

FAUCETMOUNTINGHOLE

You will need to select the location of the Reverse

Osmosis Faucet. You have three options to choose

from:

•Usetheexistingsinktopholeforthesprayhose

orsoapdispenser (Must be 1-3/8" in diameter)

•Drillanewholeinthesink

•Drillanewholeinthecountertopnexttothe

sink

1. Determine where you are going to install your

Reverse Osmosis Faucet.

2. Check to ensure the Reverse Osmosis faucet will

mount flat against the mounting surface.

3. Visually review the routing of the tubes from the

Reverse Osmosis filter assembly to the faucet.

Check to ensure there is adequate tube routing

space between the faucet and filter assembly.

4. If drilling is needed, drill a 1-3/8" diameter hole in

the mounting surface.

IMPORTANT:Drillingholesintocountertopsand

sinksshouldonlybeperformedbyaninstaller

whoisqualifiedfordrillingsuchmaterials.

Drillingofsurfacesmadeofstoneorsolidsur-

facematerialssuchasgranite,marble,Corian™

orotherplasticresinproductsorsinksmadeof

porcelainorstainlesssteelmaycauseperma-

nent,irreparabledamagetothesinkorcounter-

topsurface.

Questions?CallTollFree1-866-986-3223

When you call, please be prepared to provide the model, date code and serial number,

Step E - Install RO Faucet

orvisitwww.whirlpoolwatertreatment.com

found on the rating decal, located inside the cover.

Monday- Friday, 8 AM - 7 PM EST

FIG.14

Table of Contents