Customer Service
If your appliance is still not working properly after making the above checks, contact the
nearest service centre.
To obtain fast service, it is essential that when you apply for it you specify the model and
serial number of your appliance which can be found either on the guarantee certificate or
on the rating plate located on the external right side of the appliance.
Replacing the lamp
1. Disconnect the mains plug from the mains
socket.
2. Replace the used lamp with a new lamp
of the same power and specifically de-
signed for household appliances. (the
maximum power is shown on the lamp
cover)
3. Connect the mains plug to the mains
socket.
4. Open the lid. Make sure that the lamp
comes on.
WARNING!
Do not remove the lamp cover at the time of replacement.
Do not operate the freezer if the lamp cover is damaged or missing.
TECHNICAL DATA
Dimensions
Rising Time
INSTALLATION
Positioning
WARNING!
If you are discarding an old appliance that has a lock or catch on the lid, you must ensure
that it is made unusable to prevent young children being trapped inside.
The appliance shall have the plug accessible after installation.
This appliance can be installed in a dry, well ventilated indoor (garage or cellar), but for
optimum performance install this appliance at a location where the ambient temperature
corresponds to the climate class indicated on the rating plate of the appliance:
Height × Width × Depth (mm):
876 × 1600 × 665
58 hours
Technical data
Further technical information are situ-
ated in the rating plate on the external
right side of the appliance.
31