Customer Service; Replacing The Lamp - AEG A80230GT User Manual

32
What to do if...
Problem
The appliance does not
work at all. Neither cool-
ing nor lighting works.

Customer Service

If your appliance is still not working properly after making the above checks, contact the
nearest service centre.
To obtain fast service, it is essential that when you apply for it you specify the model and
serial number of your appliance which can be found either on the guarantee certificate or
on the rating plate located on the external right side of the appliance.

Replacing the lamp

1. Disconnect the mains plug from the mains
socket.
2. Replace the used lamp with a new lamp
of the same power (the maximum power
is shown on the lamp cover).
3. Connect the mains plug to the mains
socket.
4. Open the lid. Make sure that the lamp
comes on.
WARNING!
Do not remove the lamp cover at the time of
replacement.
Do not operate the freezer if the lamp cover is damaged or missing.
Possible cause
Plug is not connected to the
mains socket properly.
Power does not reach the appli-
ance.
The appliance is not switched on. Switch on the appliance.
There is no voltage in the mains
socket (try to connect another
appliance into it).
Solution
Connect the mains plug properly.
Try connecting another electrical
device to the power outlet.
Call an electrician.