Switching On; Switching Off; Temperature Regulation - AEG A80340GT User Manual

22
Control panel

Switching on

After plugging the plug into the power outlet, if the display is not illuminated, press Ap-
pliance ON/OFF button..
As soon as the appliance is turned on, it is in alarm condition, the temperature flashes and
you will hear a buzzer.
Press Confirmation Button and the buzzer will go off (also see the section on "Excessive
temperature alarm" ) the icon
warmest temperature reached.
For a correct storage of the food select the Eco Mode function that guarantee the following
temperature is set:
-18°C in the freezer
• Wait until the inside compartment temperature reach -18°C, before introducing the
goods in the freezer compartment.
• To select a different temperature see "Temperature regulation".

Switching off

The appliance is shut off by pressing Appliance ON/OFF button for more than 1 second.
During this, a countdown of the temperature from -3 -2 -1 will be shown.
WARNING!
Do not place any object on the control panel as it may accidentally switch off the freezer.
For a prolonged life of the appliance do not switch the freezer on and off within 10 minutes.

Temperature regulation

The freezer is provided with the symbol
freezing fresh food and for long term storage of frozen and deep-frozen food. The tem-
perature may be regulated between -15°C and -24°C. We suggest setting the internal
temperature of approximately -18°C, which guarantees proper freezing and conservation
of the frozen foods.
The temperature may be regulated by pressing the Temperature regulation button.
By pressing the Temperature regulation button the current temperature setting flashes on
the indicator and by pressing the button again it is possible to change it.
You confirm the choice of the temperature by pressing the Confirmation button. The tem-
perature indicator shows the set temperature.
The set temperature will be reached within 24 hours.
Fluctuations of some degrees around set temperature are normal and does not mean any
fault in the appliance.
After a long period out of use it is not necessary to set again the temperature because it
remains stored.
still flashes and on the indicator
which means that it is suitable for
will appear the