Tv Operations; Ac Processor Operations - Clarion DRX9675z Owner's Manual

TV Operations

TV tuner functions
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
Watching a TV
1. Press FUNCTION button 7 and select the
TV mode.
2. Press BAND button 8 to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles
between TV1 and TV2.
3. Press the right or left side of SEARCH button
4 to tune in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
1. Press the Shift button ! to display the
subdisplay.
2. Press the VTR button " and select the VTR.
3. To return to the TV broadcast, press the TV
button ".
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press BAND button 8 and select the desired
TV band (TV1 or TV2).
If "MANU" is lit on the display, press and hold
BAND button 8 for 1 second or longer.
"MANU" in the display goes off and seek tuning
is now available.
2. Press the right or left side of SEARCH button
4 to automatically seek a station. Press the
right side of SEARCH button 4 to
automatically tune up the frequency band to
the next available TV station; press the left
side to automatically tune down.
22
DRX9675z
Manual tuning
There are 2 ways available: Quick tuning and step
tuning. When you are in the step tuning mode,
the frequency changes one step at a time. In
quick tuning mode, you can quickly tune the
desired frequency.
1. Press BAND button 8 and select the desired
band. (TV1 or TV2)
If "MANU" is not lit in the display, press and
hold BAND button 8 for 1 second or longer.
"MANU" is lit in the display and manual tuning
is now available.
2. Tune into a station.
Quick tuning:
Press and hold the right or left side of
SEARCH button 4 for 1 second or longer to
tune in a station.
Step tuning:
Press the right or left side of SEARCH button
4 to manually tune in a station.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favorite
TV stations and store them in memory for later
recall.
1. Press BAND button 8 and select the desired
TV band. (TV1 or TV2)
2. Press the Shift button ! to display the preset
channel display.
3. To recall a stored TV station, press the desired
Preset button " to select that station.
Press and hold one of Preset buttons " for 2
seconds or longer to store the current station
into the preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press the Shift button ! to display the preset
channel display.
3. Press and hold one of Preset buttons " for 2
seconds or longer to store the current station
to that preset memory.
TV Operations
Auto store
Auto store selects 6 TV stations automatically
and stores each one into a preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain and
only the strong stations are stored into memory.
1. Press BAND button 8 and select the desired
TV band. (TV1 or TV2)
2. Press the Shift button ! to display the
subdisplay.
3. Press and hold the AS button " for 2 seconds
or longer. The stations with good reception
are automatically stored to preset buttons.
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for desired TV station in memory.
1. Press the Shift button ! to display the
subdisplay.
2. Press the PS button ".
3. When the desired channel is received, press
the PS button " again.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press MODE button & four times to switch
to the adjustment selection display.
2. Press VOLUME buttons 2 up (w) or down
(z) to select "TV DIVER".
3. Press the right side of SEARCH button 4 to
move the cursor.
4. Press VOLUME buttons 2 up (w) or down
(z) to set to "ON" or "OFF".
ON:
Sets reception emphasizing the visual.
OFF:
Sets the diver setting to OFF.
5. Press MODE button & or Press and hold ENT
button $ for 1 second or longer to return to
the previous mode.

AC PROCESSOR operations

AC PROCESSOR functions
• Standard mode:
Adjustment using the graphic equalizer function
and the DSF (Digital Sound Field) function.
• Professional mode:
Adjustment using the VSE (VIRTUAL SPACE
ENHANCER) function and the parametric
equalizer function.
When the STD mode is selected, adjustment for
the professional mode cannot be made. On the
contrary, when the professional mode is selected,
adjustment for the easy mode cannot be made.
Operations common to each mode
Enjoying the spectrum analyzer
This unit can display the spectrum analyzer
patterns. There are 7 spectrum analyzer patterns.
1. Press DISP button 3 to select the spectrum
analyzer display.
2. Each time you press and hold DISP button
3 for 1 second or longer, the spectrum
analyzer patterns are switched.
Setting the sensitivity of the
spectrum analyzer
The factory default setting is "MID".
1. Press MODE button & four times to switch
to the adjustment selection display.
2. Press VOLUME buttons 2 up (w) or down
(z) to select "ANA SENS".
3. Press the right or left side of SEARCH button
4 to move the cursor.
4. Press VOLUME buttons 2 up (w) or down
(z) to set the sensitivity of the spectrum
analyzer.
You can choose one of "LOW", "L-M", "MID"
"M-H" or "HIGH" for the sensitivity of the
spectrum analyzer.
5. Press MODE button & or press and hold ENT
button $ for 1 second or longer to return to
the previous mode.
DRX9675z
23